How large is the VIC6040 working area?
600*400mm. It is the working-area entry, so request separate overall machine dimensions when planning installation space.
Laser Cutting Machine
VIC6040 — VIC Laser Cutting Machine
VIC6040 is the 600*400mm working-area model in the VIC CO2 laser cutting series. Its catalog lists an 80-600W laser power range, a Ruida control system with USB interface, and a choice of knife or honeycomb working table. Use the area to start a size comparison, then specify the power and table you want quoted.
A small finished component can still arrive as part of a larger blank. For this model, put both sizes in your inquiry: the outside dimensions of the incoming material and the outline of the finished part. That gives the equipment discussion a clearer starting point than the part name alone.
Technical specifications
| Specification | VIC6040 |
|---|---|
| Working Area | 600*400mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC6040 working area and listed components
The VIC6040 working area has two dimensions to check: 600mm and 400mm. If you are comparing the next listed VIC size, VIC9060 is 900*600mm. Both dimensions change. Place the proposed layout beside each complete area entry before deciding which model to discuss; the model number alone does not describe your arrangement of parts.
The VIC series configuration describes a CO2 cutting head and CO2 laser tube, with linear guides, stepper motors and belt drive. These named components explain the listed machine structure. For a purchase request, ask for the actual component specification alongside the selected power, especially if your comparison includes offers with different equipment descriptions.
Three separate precision entries appear in the table: Min Line Width is ≤0.15mm, Position Accuracy is 0.01mm, and Repetition Accuracy is 0.02mm. Keep those labels when sharing the specifications internally. A tolerance marked on your finished-part drawing is a separate requirement to discuss with the proposed setup.
Planning work for the VIC6040 CO2 laser cutting machine
Prepare a layout that shows what you intend to place within the working area. Imagine a buyer comparing one outline with several copies of that outline: the individual part size answers only part of the question. Show the proposed arrangement, material description and thickness, and identify the edges or small details that need attention.
If you have more than one job, send a representative drawing for each rather than describe all work as similar. Include the drawing revision and required quantity. These details are inputs for an application discussion; this page does not turn the shared catalog power range into a confirmed material or thickness capability.
VIC6040 configuration
The working-table row says Knife Table or Honeycomb Table. The configuration description identifies aluminum blades for the knife-table option. Ask which table is included in the VIC6040 offer and state your preference if you have one. The two names do not mean that both tables come with every machine.
A red-dot pointer is an optional item in the VIC description. It projects a visible point onto the workpiece to assist material positioning. Include it as a separate line in the request if you want it; its presence should be confirmed with the other selected items before an order is finalized.
For controls and installation planning, the listed formats include PLT, DXF, BMP, JPG and AI. The power-supply entries are 220V/50HZ and 110V/60HZ. Send a representative file and state the supply available at the destination. Ask the proposal to identify the electrical version rather than read the two entries as automatic voltage switching.
Product questions
Does VIC6040 have a fixed laser power?
The catalog gives 80-600W. The selected power should be named in the quotation rather than left as the full range.
Which table can I request?
The table lists knife or honeycomb. Aluminum blades are described for the knife option; confirm the selected table in the equipment list.
Is the red-dot pointer included?
It is described as optional. Request it explicitly if material-positioning assistance is part of your desired configuration.
What is the next listed working area?
VIC9060 lists 900*600mm. Compare both dimensions with your incoming blank and proposed layout.
Related equipment and information
Explore CO2 laser cutting equipment
Ready to discuss VIC6040?
Share your material, dimensions and process. Start a conversation about the right configuration.