VIC1325 — VIC Laser Cutting Machine

The VIC1325 working area describes 1300mm by 2500mm. It does not describe the complete machine envelope or establish how material will be fed. If you are considering a long layout, show its orientation and outside dimensions. Keep requirements for loading, access and installation space separate from the work-area entry in the equipment table.

The published VIC structure names a CO2 cutting head, CO2 laser tube, linear guides, stepper motors and belt drive. These components provide a starting list for comparing configurations. Ask the offer to identify the actual supplied equipment, especially when a preferred component or a proposed alternative affects your purchasing decision.

Position Accuracy and Repetition Accuracy are separate rows, at 0.01mm and 0.02mm respectively. Min Line Width is ≤0.15mm. If a finished part has a critical feature, mark its requirement on the drawing and ask for it to be reviewed. The equipment fields should retain their labels when they are copied into purchasing documents.

Suppose a procurement team has selected the 1300*2500mm area but has not agreed on the working surface. Send the intended material, thickness, blank dimensions and part layout together, and request advice on the table selection. The inquiry then presents a specific application question instead of an unexplained preference for one table name.

Include the production-file revision and any requirement that influences the finished result. A list of several jobs should keep each material and thickness paired with its own drawing. Do not compress the request into a single maximum size if the decision also depends on other recurring work you expect the equipment to handle.

Knife and honeycomb are alternative entries in the working-table row. Aluminum blades are described for the knife-table option in the VIC configuration. Ask for one offered selection to be named clearly, with any requested alternative explained separately. There is no basis in the word or to assume both surfaces are included.

The optional red-dot pointer projects a visible point onto the workpiece to help position material. State whether you want this item included. Keep it on the same configuration list as the selected power, so a revised proposal can be checked without relying on the appearance of a general product image.

Graphic formats named for the Ruida USB control include PLT, DXF, BMP, JPG and AI. Identify the units and scale of your representative file. For installation planning, the table gives 220V/50HZ and 110V/60HZ electrical entries. Tell the supplier which supply is available and request confirmation of the proposed machine version.