VIC1530 — VIC Laser Cutting Machine

Match the VIC1530 working area to the complete outline you intend to present for review. Show the blank dimensions, arrangement of parts and intended orientation, especially if one of the two dimensions drives your selection. An inquiry that contains only a finished-part size may leave out the larger starting material relevant to that comparison.

The VIC configuration describes a CO2 cutting head and tube, linear guides, stepper motors and belt drive. Request the offered component specifications together with the model and power selection. This keeps an equipment comparison tied to the actual proposal instead of treating a shared series description as a complete order specification.

Cutting Speed is given as 150mm/s, with Position Accuracy 0.01mm and Repetition Accuracy 0.02mm in separate rows. Min Line Width is ≤0.15mm. Preserve these labels in a specification sheet. A desired job time, edge condition or finished-part tolerance should be presented as a requirement for the particular work you submit.

Imagine that a team is shortlisting VIC1530 for a large recurring layout while also planning smaller jobs. Send the representative large layout and the additional drawings, each with material, thickness and quantity. Explain which job determines the model choice. That makes the main requirement visible without hiding the rest of the proposed work.

Prepare a separate installation note with the destination supply and the access or space information you need answered. Request the overall equipment dimensions before finalizing that layout. The 1500*3000mm working-area entry should not be used as a substitute for an installation drawing or as evidence of a particular loading arrangement.

The working-table row offers Knife Table or Honeycomb Table. The series configuration describes aluminum blades for the knife option. Ask which table the quotation includes, and identify any preferred alternative. If several offers use the VIC1530 name, a clearly stated table selection gives you one concrete item to compare.

The optional red-dot pointer projects a visible point for material positioning. Decide whether it belongs in the requested equipment list and ask for its inclusion to be stated. The same list should name the selected laser power within the published 80-600W range, rather than leave that entire range as the supplied specification.

Ruida with USB interface is the listed control configuration, and the format row names PLT, DXF, BMP, JPG and AI. Send a representative file with units and revision identified. Electrical alternatives are 220V/50HZ and 110V/60HZ. State the available supply and have the offered electrical version confirmed with the equipment selection.