VIC1390 — VIC Laser Cutting Machine

The VIC1390 working area is a 1300mm by 900mm entry. Put those two dimensions beside the outside boundary of your intended layout. If a part is being revised, include both the current and proposed drawings, clearly labeled. A quotation discussed around an older outline may need a fresh size review when that outline changes.

CO2 cutting head, CO2 laser tube, linear guides, stepper motors and belt drive are the structural components described for VIC. Keep the offered component details with the machine specification. The series description identifies the architecture; the proposal should identify the selected equipment that accompanies your VIC1390 request.

The listed precision fields are Position Accuracy 0.01mm, Repetition Accuracy 0.02mm and Min Line Width ≤0.15mm. They describe different entries in the equipment table. If your drawing requires a particular finished dimension, show that requirement explicitly rather than substitute one of these machine figures for the finished-part tolerance.

A useful job package has a drawing, a representative file and a short description of the intended result. Imagine that the drawing has been enlarged but the file still contains an earlier outline. Naming the same revision on both gives the application discussion a clear reference and makes it easier to identify a mismatch before finalizing a proposal.

List material description, thickness and quantity beside each job. Mark any critical edges, openings or dimensions you want assessed, and describe what happens to the part after cutting. These notes help define the request. They do not assume that a particular material or thickness is covered simply because it fits inside the working area.

Ruida with USB interface is the listed controller, and the graphic-format row names PLT, DXF, BMP, JPG and AI among the supported formats. State the units and intended scale when sending a file. If the production file and the drawing serve different purposes, identify both so the requested geometry remains clear.

Choose the worktable explicitly. The table offers knife or honeycomb, while the VIC configuration describes aluminum blades for the knife option. An optional red-dot pointer projects a visible point onto the workpiece for positioning. Ask for the selected table and pointer inclusion to appear as separate items in the equipment offer.

The power range of 80-600W and the electrical entries of 220V/50HZ and 110V/60HZ need specific selections in a quotation. Provide the installation supply and the application information together. The cutting-speed row is 150mm/s; a requested job time still needs discussion around the actual drawing and proposed setup.