What differs between VIT-A6022 and VIT-A6035?
Cutting Area is 6000*220mm for VIT-A6022 and 6000*350mm for VIT-A6035. The listed power range, component alternatives and motion fields are shared.
Tube Laser Cutting Machine
VIT-A Laser Cutting Machine
VIT-A is a tube and fiber laser cutting machine series with two models, VIT-A6022 and VIT-A6035. Their Cutting Area entries are 6000*220mm and 6000*350mm. Both list a Laser Power range of 1000-6000W. The A is part of the series name; it does not, by itself, specify an automatic loading arrangement.
There are only two model columns to compare here, and the area is the stated dimensional difference. The component alternatives and motion entries are shared. Keep the field name Cutting Area when transferring either value into an inquiry. Replacing it with maximum tube diameter would add an interpretation the table does not establish for each section shape.
Technical specifications
Choose an individual model below to view its complete technical specification. The series overview shows selected parameters for comparison.
- Cutting Area
- 6000*220mm / 6000*350mm
- Laser Power
- 1000-6000W
Choose a model
VIT-A6022 and VIT-A6035 specifications
Max. Acceleration is 0.6G in both columns. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. These are three separate specification fields. They do not describe a cutting cycle or guarantee a finished tube component's dimensions under an unspecified set of conditions.
The optical options are also common to VIT-A6022 and VIT-A6035. Raytools, WSX, BOCI and Osprey appear under Laser Head; Raycus, MAX and IPG appear under Laser Generator. Choosing the 6000*350mm area entry therefore does not select a different fixed set of optical components. The proposed head, generator and power still need identification.
VIT-A tube laser cutting machine planning
Tube work benefits from a section drawing. Show whether the incoming stock is round, rectangular or another shape, with outside dimensions and wall thickness. Add the material grade and incoming length. These details describe the work you want reviewed against VIT-A, rather than asserting that a particular shape has already been tested or accepted.
The finished drawing should show end cuts, holes and slots, including features on another face. Where an orientation matters to the assembly, identify it on the drawing. Give each part a reference and revision; then associate the required quantities with those references. This avoids letting one section description stand in for several different finished parts.
For a changing workload, separate the recurrent tube sections from occasional ones. Keep any assumptions used in a proposed output estimate with the relevant part and configuration. The equipment's 0.6G acceleration entry remains a machine field, while an estimate for a job must retain the details of that job.
VIT-A configuration and quotation details
The Control System row lists CypCut and Weihong. Servo Motor And Driver names Fuji, Delta and Yaskawa. Taiwan Linear Rails are specified under Guide Rails; Japan Shinbo and France Mortori are listed under Reducer. An itemized request makes it clear which component preferences are firm and which are open for discussion.
Loading and removal need their own scope. Indicate the incoming lengths, how stock would approach the proposed equipment position and where finished pieces would be collected. Identify equipment already on site separately from new supply. The VIT-A name does not convert those requested arrangements into included standard equipment.
For the final comparison, put the complete model, selected power, head, generator and control beside the handling request. Keep the source's alternatives visible in your reference table, but identify actual selections in the quotation. You can then see whether two offers describe the same configuration rather than merely the same series.
Product questions
Does the A suffix confirm automatic loading?
No loading package is established by the suffix. Describe the loading and removal arrangement you need and have its scope identified explicitly in the offer.
What is the VIT-A power range?
The Laser Power row states 1000-6000W for both models. The proposed power is a selection to identify alongside the generator and laser head.
Is the second area dimension a universal tube diameter limit?
The source calls the field Cutting Area. Keep the actual section shape and dimensions in the inquiry instead of assuming a diameter interpretation for every stock type.
Which drawing details help with a tube inquiry?
Provide the section, material, wall thickness and incoming length together with the finished holes, slots and end features. Keep quantities and drawing revisions tied to each part.
Related equipment and information
Ready to discuss VIT-A Laser Cutting Machine?
Share your material, dimensions and process. Start a conversation about the right configuration.