What is the VIT-A6022 cutting area entry?
The source lists 6000*220mm under Cutting Area. The original field label should remain attached to the value.
Tube Laser Cutting Machine
VIT-A6022 — VIT-A Laser Cutting Machine
VIT-A6022 specifications list a 6000*220mm Cutting Area entry and a laser power range of 1000-6000W. The model belongs to the VIT-A tube and fiber laser cutting range. It is one of two named models in the table, alongside VIT-A6035.
Keep the original Cutting Area label when using the 6000*220mm value in a comparison. It should not automatically become a maximum tube diameter or loading-length claim. Your inquiry needs the actual tube section, stock length and drawing so those requirements can receive a specific response.
Technical specifications
| Specification | VIT-A6022 |
|---|---|
| Cutting Area | 6000*220mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1000-6000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.6G |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-A6022 cutting area and specification labels
The VIT-A6022 cutting area entry differs from VIT-A6035 at 6000*350mm in the second number. Both share the 6000mm entry. This is a comparison of the published fields; the proposed arrangement still needs to be confirmed against the workpiece you intend to process.
The table lists maximum acceleration of 0.6G for VIT-A6022. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Keep those labels separate in the equipment record. They do not state a cutting cycle or a guaranteed dimensional outcome for every finished tube component.
The 1000-6000W range is shared by the two VIT-A models. It does not define one fixed machine configuration or a maximum wall thickness. A proposal should identify a particular power rating and the component choices against the actual material and part requirements.
A section brief for a VIT-A6022 fiber laser cutting machine
For a VIT-A6022 fiber laser cutting machine brief, start with a tube-section record. State the section shape, outside dimensions, wall thickness and material grade, then identify the incoming length and the part drawing. Include the revision and quantity so the supplier is responding to a defined job.
Mark the features and dimensions that matter on the finished component. If several tube sections are planned, describe them separately instead of relying on one general family name. The Cutting Area row does not supply confirmation for every shape or stock arrangement in a mixed workload.
A comparison with VIT-A6035 should use the same workpiece information unless the requirement itself changes. Ask which proposed configuration addresses the stated section and drawing. Do not infer the answer merely from the 220mm and 350mm entries, whose published field label is Cutting Area.
VIT-A6022 configuration for the proposed tube work
The VIT-A6022 configuration lists Raytools, WSX, BOCI and Osprey head alternatives and Raycus, MAX and IPG generators. CypCut and Weihong are the control choices. Ask the proposal to identify the selected power, head, source and controls as a definite combination.
The servo motor and driver row lists Fuji, Delta and Yaskawa. The rail entry is Taiwan Linear Rails, with Japan Shinbo or France Mortori reducers. Several alternatives in a row are not simultaneous inclusions, so keep the actual selected components visible in the quotation.
Send the section record and part drawing through the contact page, with the loading and installation questions that need an answer for the destination. The series page provides the other VIT-A model entry. Request overall equipment and installation details separately from the table's Cutting Area field.
Product questions
Does 220mm automatically mean maximum tube diameter?
That interpretation is not established by the Cutting Area label alone. Provide the actual section and ask for its compatibility with the proposed arrangement to be confirmed.
How does VIT-A6035 differ in the table?
It lists 6000*350mm, compared with 6000*220mm for VIT-A6022. The second entry changes while the first remains the same.
What power is available in the published range?
The table gives 1000-6000W. Confirm a selected rating, generator and other components for the machine being proposed.
What information should accompany the inquiry?
Send section shape and dimensions, wall thickness, material, incoming length, drawing revision and quantity. Identify critical features and any loading or installation questions separately.
Related equipment and information
Compare VIT-A Laser Cutting Machine models
Ready to discuss VIT-A6022?
Share your material, dimensions and process. Start a conversation about the right configuration.