What is the VIT-A6035 cutting area?
The published field is Cutting Area with a value of 6000*350mm. Keep that label when recording the specification.
Tube Laser Cutting Machine
VIT-A6035 — VIT-A Laser Cutting Machine
VIT-A6035 specifications give a 6000*350mm Cutting Area entry and a 1000-6000W laser power range. The model is part of Victory Industry's VIT-A tube cutting range. The other model in the table, VIT-A6022, lists 6000*220mm under the same field label.
That published comparison is a starting point for a tube-work inquiry, not a substitute for the section drawing. Retain the Cutting Area label and describe the actual outside dimensions, wall thickness and stock length separately. The 350mm entry should not be restated automatically as a maximum tube diameter.
Technical specifications
| Specification | VIT-A6035 |
|---|---|
| Cutting Area | 6000*350mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1000-6000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.6G |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-A6035 cutting area compared with VIT-A6022
The VIT-A6035 cutting area differs from VIT-A6022 only in the second published number, changing from 220mm to 350mm. The table gives the same power range and other listed configuration fields for both columns. Ask for a response to your specific section rather than choosing from the larger number alone.
Maximum acceleration is listed at 0.6G. Positioning Accuracy is 0.05mm, and Repositioning Accuracy is 0.03mm. Use the source labels when comparing equipment, with the required component dimensions separately marked on the drawing. Neither an acceleration nor an accuracy row supplies a finished-part production commitment.
A power range of 1000-6000W does not define the selected rating in a quotation or establish a wall-thickness capability. Keep the material, thickness and part geometry in the application brief, then ask for a definite component and power proposal against those requirements.
A section schedule for a VIT-A6035 fiber laser cutting machine
For a VIT-A6035 fiber laser cutting machine inquiry, organise a mixed tube workload by section rather than by assembly name alone. Give each section its shape, dimensions, wall thickness, material grade and incoming length. Associate the drawing revision and required quantity with that same entry.
Where several parts use the same stock, identify the different finished features and any dimensions needing particular attention. The supplier can then distinguish a stock-format question from a feature requirement. A shared material name does not mean that every part drawing asks the same processing question.
If VIT-A6022 is also being considered, keep the job descriptions consistent between the inquiries. Ask about the proposed arrangement for the actual sections and loading requirements. The Cutting Area comparison alone does not establish a complete list of allowable tube shapes, stock lengths or installation details.
VIT-A6035 configuration and component selections
The VIT-A6035 configuration lists Raytools, WSX, BOCI and Osprey heads, with Raycus, MAX and IPG generators. CypCut or Weihong controls are shown. Confirm a chosen power rating and the actual head, source and controls so the proposal describes a specific equipment combination.
The drive alternatives are Fuji, Delta and Yaskawa for the servo motor and driver. Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. Record the selected components individually, since a row of alternatives is not a statement that every brand is supplied together.
Use the series page to compare the two VIT-A entries and the contact page to send the section and drawing list. Include requests for loading and installation information needed at the destination. The published Cutting Area field should not be used as an overall machine footprint or a complete site arrangement.
Product questions
How does VIT-A6035 compare with VIT-A6022?
VIT-A6022 lists 6000*220mm. The second number changes, while the first remains 6000mm and the published power range remains shared.
Does the 350mm entry define every acceptable tube section?
No complete section range follows from the field alone. Send the actual shape, dimensions and drawing for a specific response.
What should the selected configuration include in the offer?
Identify the power rating, head, generator, controls and drive choices rather than leaving the proposal as the entire published list of alternatives.
What helps when several tube sections are involved?
Keep a separate record for each section, with material, wall thickness, incoming length, drawing revisions and quantities. Mark the finished features and outstanding loading questions.
Related equipment and information
Compare VIT-A Laser Cutting Machine models
Ready to discuss VIT-A6035?
Share your material, dimensions and process. Start a conversation about the right configuration.