What is the VIP6015 cutting area?
The source lists 6000*1500mm. This is the model-area entry used for comparing the intended sheet format.
Sheet Laser Cutting Machine
VIP6015 — VIP Laser Cutting Machine
VIP6015 specifications list a 6000*1500mm cutting area, a 1500-20000W power range and 140m/min maximum linkage speed. The model shares a 1500mm second area dimension with VIP3015 and VIP4015. Its first area entry is 6000mm, providing a specific comparison for longer sheet stock.
The longer format should be tied to identifiable work in the purchasing brief. Describe the stock and the parts intended for it, then keep the selected power and component questions with those requirements. A motion figure or area dimension alone does not state how the job will perform.
Technical specifications
| Specification | VIP6015 |
|---|---|
| Cutting Area | 6000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP6015 cutting area and motion parameters
The VIP6015 cutting area can be compared with VIP3015 at 3000*1500mm when the second dimension is to stay the same. VIP6025 lists 6000*2500mm if the question concerns additional width at the shared 6000mm entry. Explain the actual stock format behind either comparison.
Maximum acceleration is 1.3G and Z axis travel is 300mm. Maximum linkage speed remains a separate 140m/min field. A long part may prompt a production-time question, but these motion entries do not supply its material cutting speed or a number of completed parts per shift.
The source lists 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. For long components with several critical features, mark the required dimensions on the drawing. That lets the application question refer to the actual part instead of using a machine field as a blanket finished-part guarantee.
Long-part requirements for a VIP6015 fiber laser cutting machine
For a VIP6015 fiber laser cutting machine inquiry, group the drawings by incoming stock format. Give each group its material grade, thickness, drawing revisions and quantities. If only a small part of the workload needs the longer area, include the regular jobs too so the model choice has a clear context.
If you need a production-time response, state the intended job and required output directly. Keep the 140m/min value labeled maximum linkage speed when discussing it. It should not be turned into a cutting-speed assumption for the material or used to estimate finished-part output without an application basis.
A revised long-part drawing should remain traceable to its earlier version. Identify which dimension or requirement changed, and whether the incoming stock changed as well. Keep the power and component preferences attached to the same revision so the quotation remains connected to a consistent brief.
VIP6015 configuration and quotation revisions
The VIP6015 configuration lists Raytools, WSX, BOCI and Osprey heads and Raycus, MAX and IPG generators. Select a power rating within the published range and ask for the proposed head and source to be named with it. The full range is not one definite machine configuration.
Control alternatives are CypCut and Weihong. Fuji, Delta and Yaskawa are the servo motor and driver choices. Record the chosen components in separate fields, together with any requested changes. Several alternatives in the source table do not imply that they are all included in a single offer.
Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. Request overall equipment and installation information for your destination when contacting the supplier. The 6000*1500mm Cutting Area is not a footprint; use the series page for area comparisons and the contact page for project-specific questions.
Product questions
How does VIP6015 differ from VIP3015?
VIP3015 lists 3000*1500mm. The second dimension is unchanged while the other area entry changes from 3000mm to 6000mm.
What changes if I compare VIP6025?
VIP6025 lists 6000*2500mm, retaining the 6000mm entry while changing the second area dimension.
Can maximum linkage speed answer a cycle-time question?
No specific cycle follows from the 140m/min linkage-speed field. Provide the drawing, material, thickness and quantity for the application discussion.
What should a configuration revision record?
Identify the selected power and components, the drawing revision and the changed requirement. Keep installation and application questions separate where an answer is still needed.
Related equipment and information
Compare VIP Laser Cutting Machine models
Ready to discuss VIP6015?
Share your material, dimensions and process. Start a conversation about the right configuration.