What cutting area is specified for VIP3015?
The published entry is 3000*1500mm. Both dimensions should stay with the model name in the equipment comparison.
Sheet Laser Cutting Machine
VIP3015 — VIP Laser Cutting Machine
VIP3015 specifications list a 3000*1500mm cutting area and a 1500-20000W laser power range. The model belongs to Victory Industry's VIP sheet and fiber laser cutting series. Its maximum linkage speed is listed as 140m/min, a motion parameter that should remain distinct from the cutting requirements of a particular job.
Build the inquiry around the sheet format, the representative part and the proposed component combination. The area comparison can help explain the model choice, while the drawing and material explain the application. Neither a power range nor a linkage-speed figure replaces that workpiece information.
Technical specifications
| Specification | VIP3015 |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.4G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP3015 cutting area and correctly labeled motion fields
The VIP3015 cutting area shares its 1500mm second dimension with VIP4015 at 4000*1500mm and VIP6015 at 6000*1500mm. If the stock width is also changing, VIP4020 lists 4000*2000mm. Name the stock format that makes each alternative relevant instead of assuming a larger entry is automatically the right purchase.
Maximum acceleration is 1.4G for VIP3015. The four other VIP models list 1.3G. Z axis travel is 300mm and maximum linkage speed is 140m/min. Keep these as separate specification fields; they do not supply a cutting cycle or a quantity of finished parts for the proposed material.
The table lists Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm. Mark any critical dimensions on the component drawing and state the required limits. Those finished-part requirements should not be replaced by an assumption that the machine's positioning entry guarantees every feature.
A job brief for a VIP3015 fiber laser cutting machine
For a VIP3015 fiber laser cutting machine inquiry, provide the incoming sheet dimensions, material grade, thickness, drawing revision and quantity for a representative job. If several jobs are involved, use a separate reference for each. This gives an application discussion a defined basis without claiming that any of the jobs have already been validated.
An output question should include the same job details. State the production requirement you want discussed rather than converting 140m/min into a presumed material cutting speed. If another quotation refers to speed differently, keep the labels visible so the figures are not compared as though they describe the same thing.
Explain any reason for considering a different area, such as a confirmed stock-format change or a provisional future drawing. Separate future requirements from the current workload. The supplier can then respond to the actual uncertainty instead of a general request for a larger machine.
VIP3015 configuration in the proposed offer
The VIP3015 configuration lists Raytools, WSX, BOCI and Osprey head alternatives, Raycus, MAX and IPG generators, and CypCut or Weihong controls. Ask for the chosen power rating, head, generator and control system to be stated together in the proposed offer.
Fuji, Delta and Yaskawa are the servo motor and driver alternatives. The rails are listed as Taiwan Linear Rails, with Japan Shinbo or France Mortori reducers. Record the selected components individually; several alternatives in a source row do not imply that every brand is installed in the same machine.
Send the defined workpiece brief through the contact page, including any component preferences and installation questions for the destination. The series page gives other VIP area entries for comparison. Request overall equipment dimensions separately, since Cutting Area does not describe the complete machine footprint.
Product questions
How does VIP4015 differ?
VIP4015 lists 4000*1500mm, retaining the 1500mm dimension while changing the other entry from 3000mm to 4000mm.
Is 140m/min a material cutting-speed claim?
No. The table labels it maximum linkage speed. A material and drawing need their own application discussion for cutting-time or output questions.
Which model lists 1.4G maximum acceleration?
VIP3015 lists 1.4G. The other four VIP models in the table list 1.3G.
What defines the actual VIP3015 configuration?
The proposal should name the selected power, head, generator, controls and drives, with the same drawing and material requirements used for the inquiry.
Related equipment and information
Compare VIP Laser Cutting Machine models
Ready to discuss VIP3015?
Share your material, dimensions and process. Start a conversation about the right configuration.