What area does the source list for VIP4020?
It gives 4000*2000mm. This differs in both dimensions from VIP3015 at 3000*1500mm.
Sheet Laser Cutting Machine
VIP4020 — VIP Laser Cutting Machine
VIP4020 specifications identify a 4000*2000mm cutting area and a published power range of 1500-20000W. The model shares the 4000mm area entry of VIP4015 but changes the other dimension from 1500mm to 2000mm. Its maximum linkage speed is listed as 140m/min.
Use the size comparison to explain the wider sheet requirement, and keep the motion field under its original label. A specific cutting or output question needs the actual material and drawing. A configuration proposal also needs the selected power and components rather than the full range of published possibilities.
Technical specifications
| Specification | VIP4020 |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP4020 cutting area and motion specification labels
The VIP4020 cutting area changes both dimensions of VIP3015 at 3000*1500mm. VIP6025 lists 6000*2500mm if the comparison involves a further change to both entries. Identify the stock formats behind the shortlist, retaining both dimensions instead of referring only to the longer one.
The table gives VIP4020 maximum acceleration of 1.3G and Z axis travel of 300mm. Maximum linkage speed is 140m/min. Keep these distinct when comparing offers, since a motion specification is not a cutting-speed statement for a material or a finished-part production rate.
Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm appear as separate rows. Describe the finished component's requirements separately on its drawing. Critical dimensions, drawing revisions and material details provide the basis for the application discussion, without turning the machine entries into a general parts guarantee.
A width-led inquiry for a VIP4020 fiber laser cutting machine
For a VIP4020 fiber laser cutting machine inquiry, explain which jobs make the 2000mm second area dimension relevant. List the sheet stock formats with their material grades and thicknesses, then associate the drawings and quantities with each format. Include regular work as well as an occasional larger outline.
If the purchasing comparison involves two power or component alternatives, keep the job descriptions consistent. A quotation based on another thickness or drawing revision may be answering a different requirement. State what is fixed in the application brief and what remains open in the equipment selection.
Where production time matters, present it as a requirement to discuss for the actual work. The 140m/min linkage-speed entry should not be substituted for that response. Likewise, a larger cutting area does not by itself establish how many parts a proposed job will produce.
VIP4020 configuration for comparing proposals
The VIP4020 configuration lists Raytools, WSX, BOCI and Osprey head alternatives. Raycus, MAX and IPG are the generator choices; CypCut and Weihong are the controls. Ask the offer to identify one proposed component combination and the chosen power rating within the published range.
The servo motor and driver alternatives are Fuji, Delta and Yaskawa. Taiwan Linear Rails appears in the rail row, and Japan Shinbo or France Mortori in the reducer row. Keep those selections visible when comparing revisions rather than leaving the entire option list as the equipment description.
Send the sheet and drawing brief through the contact page with the installation questions for your destination. Ask for overall equipment dimensions separately from the Cutting Area value. The series page provides the other model-area entries if the requirements lead to another size comparison.
Product questions
What changes from VIP4015?
Both models list 4000mm as the first area dimension. The second entry changes from 1500mm to 2000mm for VIP4020.
Can 140m/min be used as the material cutting speed?
The source calls it maximum linkage speed. It should not be reported as material cutting speed or completed-part output.
Is the full power range one configuration?
No. The table gives 1500-20000W as the published range. Confirm a particular rating and generator in the proposed machine configuration.
What makes two VIP4020 offers comparable?
Use the same stock formats, materials, thicknesses and drawing revisions, then record the selected power and component choices for each offer. Keep open application questions visible.
Related equipment and information
Compare VIP Laser Cutting Machine models
Ready to discuss VIP4020?
Share your material, dimensions and process. Start a conversation about the right configuration.