Where does VIM70FS sit in the series?
It is the 70W model between the 60W and 100W entries, with a published wavelength of 1080nm. Those values identify the catalogue option rather than a measured result for a specific job.
Laser Marking Machine
VIM70FS — VIM-FS Laser Marking Machine
VIM70FS is the 70W, 1080nm split-design fiber laser marking model in the FS range. For operating handover, document the control position together with the intended artwork and component arrangement. The separated source and control structure makes a clear equipment layout useful during procurement.
Keep the selected optics, source option and job-file revision in one record. That record is a suggested buyer document, not an automatic machine feature. It gives a future operator or purchasing colleague a specific configuration to refer to when a drawing or marking request changes.
Technical specifications
| Specification | VIM70FS |
|---|---|
| Laser Power | 70W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM70FS fiber laser marking machine structure
The source identifies a fiber generator, air cooling, galvo scanner and field lens. A red dot pointer provides a visible positioning reference. The split structure separates the laser source from the control unit but does not assign their dimensions, connection length or maximum separation distance.
The control system allows setting adjustments, configuration and monitoring. State what information the operator needs to see and which settings require review during a job change. The source does not specify an automatic version library, part-recognition system or external production-data interface.
Minimum Line Width is 10 Microns and Minimum Characters is 0.15mm. The character field describes a dimension, not a string length. Include the full proposed graphic in the handover information instead of assuming that these two entries establish readability or appearance for every font and surface.
VIM70FS work preparation
A task record can state the exact substrate, surface finish, artwork revision and location on the component. No specific material compatibility list or proven application result is established here. If the same part receives several different marks, assign a clear location reference to each.
Show how the component is supported and oriented at the proposed station. Mark the desired control access location on that layout. These preparation details do not imply automatic component recognition, a supplied fixture or an agreed installation; they define questions to resolve with the offered equipment.
VIM70FS 70W laser marker configuration
The table lists marking fields of 110*110mm and 200*200mm and names Raycus and IPG generator options. Record the chosen lens and source beside VIM70FS. Keep any alternate optics or requested accessories separate from the confirmed included equipment.
Supported extensions include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Retain the actual working file with a dimensioned reference view. Request the delivered connections, equipment dimensions and operating instructions before fixing the source and control positions in the layout.
The operating environment is stated as clean and dust-free or low-dust. The described interlock stops the machine when a safety door or panel opens, while station protection requires a complete review. The >100000 Hours Laser Module Life field should remain separate from service agreements, warranty conditions and records of actual operation.
Product questions
Does the machine store and manage artwork revisions?
That capability is not established by the source. Keep revisions in the buyer's job documentation and request confirmation of any particular software or data-management function needed for the proposed workflow.
How should the character dimension be recorded?
Record 0.15mm as the published Minimum Characters dimension. It is not the number of characters allowed in a line or a guarantee that every submitted font meets a required inspection result.
Can the control unit be placed at any distance?
No unlimited reach or numerical connection length is specified. The proposed positions need to be checked against the actual delivered connections and installation requirements of the offered configuration.
Does the module-life value establish coverage?
No. The >100000 Hours figure is labelled Laser Module Life. Warranty duration and service coverage for the machine and accessories require separate commercial terms.
Related equipment and information
Compare the VIM-FS Laser Marking Machine series
Ready to discuss VIM70FS?
Share your material, dimensions and process. Start a conversation about the right configuration.