Which entries surround VIM60FS?
VIM50FS and VIM70FS are the adjacent 50W and 70W choices. VIM60FS is the 60W, 1080nm entry; this catalogue ordering does not compare results on your particular component.
Laser Marking Machine
VIM60FS — VIM-FS Laser Marking Machine
VIM60FS is the 60W split-design fiber laser marking model between the 50W and 70W entries in the FS table. The published wavelength is 1080nm. For jobs with different component orientations, organise the enquiry around each marking face and the proposed source and control locations.
A changed orientation can alter the layout information even when the artwork stays the same. Provide a drawing for each arrangement and label the intended graphic position. This describes the work you want to discuss without assuming that the split design automatically accommodates every angle or component shape.
Technical specifications
| Specification | VIM60FS |
|---|---|
| Laser Power | 60W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM60FS fiber laser marking machine structure
The source describes separation of the laser source and control unit. Its named components include air cooling, a fiber generator, galvo scanner and field lens. Actual connections and equipment dimensions need to be confirmed; no cable length, rotary attachment or universal workpiece envelope is established here.
The red dot pointer supplies a visible positioning reference. The control system supports adjustment, configuration and monitoring. Those features do not demonstrate automatic tracking of a rotated component or automatic selection of a process when the part orientation changes.
The table states 10 Microns for minimum line width and 0.15mm for minimum character dimension. Keep the complete artwork size and its location separate from those fields. A character dimension does not define text length or guarantee a particular appearance on all surfaces and fonts.
VIM60FS work preparation
For every proposed orientation, supply the component outline, substrate and surface condition. The admitted information contains no specific material compatibility list or customer test result. If different faces have different treatments, identify them independently rather than describing the whole part with one general material name.
Show support points, nearby obstructions and any planned repositioning of the component. These details help frame the equipment discussion. They are buyer requirements, not evidence that positioning fixtures, rotating equipment or automatic handling are included in the delivery or validated for your part.
VIM60FS 60W laser marker configuration
The published choices are 110*110mm and 200*200mm marking ranges with Raycus and IPG generator options. Attach the selected lens and source to the VIM60FS quotation. Where the same graphic is used in several orientations, retain its revision and finished dimensions with each placement drawing.
Supported graphic formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Identify the proposed control access position and request actual connection details. Separate machine equipment from supports or accessories being requested for the workstation so the supply boundary remains clear.
The table specifies a clean, dust-free or low-dust environment. The interlock description stops operation when a safety door or panel opens; complete workstation protection must be reviewed separately. Laser Module Life is published as >100000 Hours, without establishing a whole-machine warranty or guaranteed operating schedule.
Product questions
How should different component orientations be shown?
Give each arrangement a drawing with the target face, graphic position and support points. Identify the actual changes rather than assuming that a split source and control arrangement proves universal access.
Does the control system recognise a repositioned part?
Automatic recognition or tracking is not specified. The admitted functions are adjustment, configuration and monitoring, with a red dot pointer providing visible positioning assistance.
Is the connection length defined?
No numerical connection reach is given. Provide the proposed source and control positions and ask for the delivered connections and installation requirements before finalising the workstation layout.
What interlock function is stated?
The machine is described as stopping when a safety door or panel opens. That mechanism does not establish complete station protection, certification or the elimination of all operational risks.
Related equipment and information
Compare the VIM-FS Laser Marking Machine series
Ready to discuss VIM60FS?
Share your material, dimensions and process. Start a conversation about the right configuration.