What identifies the VIM20FS model?
It is the 20W, 1080nm entry in the split-design FS family. Its generator and optical field should be identified separately in the quotation so the model name describes a clear delivered configuration.
Laser Marking Machine
VIM20FS — VIM-FS Laser Marking Machine
VIM20FS is the 20W split-design fiber laser marking model in the VIM-FS family, with a published wavelength of 1080nm. Its laser source and control unit are separated. Plan their proposed positions alongside the workpiece and artwork so the enquiry describes a complete working arrangement.
Start with a layout showing the component support, marking face and desired control position. Add the graphic dimensions and orientation. The split structure provides a configuration topic to discuss, but it does not establish an unlimited separation distance or automatic suitability for any large component.
Technical specifications
| Specification | VIM20FS |
|---|---|
| Laser Power | 20W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM20FS fiber laser marking machine structure
The source identifies air cooling, a fiber generator, galvo scanner and field lens. A red dot pointer provides a visible positioning reference. Ask for the actual equipment dimensions and connection requirements before fixing the layout; no cable length or maximum spacing between units is assigned in the admitted table.
The control system offers setting adjustment, configuration and monitoring. Indicate where the operator needs access to those functions during the proposed job. No software brand, automatic recognition of the component or production-system interface is established by this description.
Minimum Line Width is 10 Microns, while Minimum Characters is 0.15mm. The character field is a dimension rather than a permitted character count. These specifications do not replace the complete artwork or prove that every substrate and font will produce the requested appearance.
VIM20FS work preparation
Describe the proposed substrate, surface condition, graphic and marking position. The admitted information does not provide a specific material compatibility list or a completed application test. If the surface is treated, include the treatment in the enquiry instead of identifying only the underlying material.
Show the part support and its orientation relative to the intended marking location. Identify nearby obstructions and the available equipment space. These are practical details for review, not claims that a fixture, rotary attachment or handling system is included with the split-design machine.
VIM20FS 20W laser marker configuration
The marking range choices are 110*110mm and 200*200mm. Raycus and IPG are the generator options listed for VIM20FS. Specify the selected source and optical arrangement in the offer, and keep their identities connected to the component layout and finished graphic dimensions.
Supported graphic formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Supply the actual file with a dimensioned placement drawing. File support does not define the unit positions, electrical connections or accessories, so request those items separately in the equipment and installation information.
The stated environment is clean and dust-free or low-dust. The published interlock action stops the machine when a safety door or panel opens. Review the actual station protection and instructions. The >100000 Hours Laser Module Life entry is a module specification, not a whole-machine warranty or a guarantee of maintenance-free operation.
Product questions
What is separated in the split design?
The source describes separation of the laser source and control unit. It does not give their permitted spacing, connection length or actual dimensions, which should be requested for the planned layout.
Can I assume a particular cable reach?
No connection length is established here. Provide the proposed positions and ask for the delivered connection details before treating that layout as an agreed installation arrangement.
What should accompany a graphic file?
Include finished dimensions, orientation, substrate and surface details, plus the position on the component. A workstation drawing should separately show the support and proposed source and control locations.
Does the interlock replace installation review?
It describes stopping when a safety door or panel opens. That action does not establish all protective measures for the station, and the stated clean or low-dust environment still applies.
Related equipment and information
Compare the VIM-FS Laser Marking Machine series
Ready to discuss VIM20FS?
Share your material, dimensions and process. Start a conversation about the right configuration.