What power and wavelength are listed for VIM60CF?
The model is listed at 60W and 10.6 μm. It belongs to the flying VIM-CF family, between the published 40W VIM40CF and 100W VIM100CF entries.
Laser Marking Machine
VIM60CF — VIM-CF Laser Marking Machine
VIM60CF is the 60W model in the VIM-CF flying CO2 laser marking family. It lists a 10.6 μm wavelength and uses the series' moving-workpiece marking arrangement. The next lower power entry is VIM40CF at 40W, while VIM100CF provides the next listed choice at 100W.
The moving material and the proposed marking point need to be described alongside the laser choice. Show how the product is presented, which surface receives the mark and where equipment can be installed. These details provide the context needed to discuss a 60W configuration rather than treating the power label as a line-performance specification.
Technical specifications
| Specification | VIM60CF |
|---|---|
| Laser Power | 60W |
| Laser Wavelength | 10.6 μm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM60CF CO2 laser marking machine structure
The configuration identifies a CO2 tube, air cooling, galvo scanner and field lens. A red dot pointer offers visible positioning. Ask for the selected optical arrangement and field in the proposal so the equipment description can be compared with the actual dimensions and placement of the graphic.
Parameter settings, adjustment and real-time monitoring are described for the controls. Use representative artwork to explain the task and identify what changes between jobs. Review the offered interface around those requirements, without assuming that a particular data connection or automated content-management function is included.
A comparison with the 40W and 100W family models should retain the same substrate, graphic and movement requirements. Only then is the 60W choice being considered against a consistent task. None of those power entries assigns the required marking time, a field-size value or the permitted spacing between products.
VIM60CF work preparation
The CO2 tube configuration names wood, acrylic and glass for marking and engraving. State the precise material and its surface finish for VIM60CF. Provide the required appearance and any inspection criteria with the artwork; the material scope does not demonstrate the result on every coating, grade or individual product.
The line information should show movement direction, product orientation and the intended mark location. Include spacing and available access around the marking point. If handling equipment already exists, identify its fixed features. Flying design does not by itself confirm a conveyor supply package or compatibility with any arbitrary line arrangement.
VIM60CF 60W laser marker configuration
Request the field, lens and control details for the proposed VIM60CF machine. No marking-area dimension, character-size limit or software brand is assigned on this page. Keep those selected items in the same equipment schedule as the 60W power and the artwork used to discuss the job.
Air cooling is listed, along with an interlock that stops operation when a safety door or panel opens. Obtain the operating instructions and actual protective provisions for the proposed installation. These component descriptions do not establish a continuous working duration or a certification for the complete production line.
A clear enquiry separates the marker from handling or support accessories requested with it. Attach the line layout and state where the controls need to be accessed. With the material, artwork and selected power identified, the remaining configuration questions can be discussed around a defined physical and functional scope.
Product questions
Does the 60W rating establish line speed?
No line-speed figure is assigned here. Provide the intended product movement, artwork and placement requirements so the proposed configuration can be discussed against the actual task.
What material scope can be used for this model?
The source names wood, acrylic and glass for marking and engraving. The specific material, surface finish and required appearance still need to be identified in the job information.
Which optical components are described?
The series configuration includes a galvo scanner and field lens, with a red dot pointer for visible positioning. Confirm the actual field and optical setup proposed for the artwork.
What belongs in the installation information?
Show the marking position, movement direction, product orientation and available access. Distinguish existing handling equipment from requested accessories and identify where the controls need to be used.
Related equipment and information
Ready to discuss VIM60CF?
Share your material, dimensions and process. Start a conversation about the right configuration.