What power and wavelength identify VIM50FD?
The published values are 50W and 1080nm. It is a desktop VIM-FD model, with VIM30FD at 30W below it and VIM60FD at 60W above it in the power list.
Laser Marking Machine
VIM50FD — VIM-FD Laser Marking Machine
VIM50FD is a 50W desktop fiber laser marking model with a published wavelength of 1080nm. The VIM-FD family places it between the 30W VIM30FD and the 60W VIM60FD. For this model, the two listed marking ranges provide a useful focus for the optical configuration discussion.
The source lists 110*110mm and 200*200mm. Begin by drawing the graphic boundary and its location on the part, then discuss which proposed field and lens correspond to that requirement. A larger listed field should not be treated as a universal improvement or as proof that both optical setups arrive with one machine.
Technical specifications
| Specification | VIM50FD |
|---|---|
| Laser Power | 50W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM50FD fiber laser marking machine structure
The desktop arrangement includes a fiber laser generator, air cooling, a galvo scanner and a field lens. A red dot pointer supplies a visible positioning reference. Its presence does not establish automatic focus or correction, so keep the positioning discussion separate from the dimensions of the selected optical field.
The control system allows adjustment of marking speed, power and frequency. Review the offered controls using the artwork you plan to submit. The description identifies adjustable parameters, without supplying a recipe for a particular material or a numerical frequency range for this model page.
Minimum Line Width is listed as 10 Microns, and Minimum Characters is 0.15mm. The character value is a dimension. These fields should be read separately from the two range entries; they do not establish that every field, surface and graphic will achieve an identical fine-detail result.
VIM50FD work preparation
The original description names metals, plastics and ceramics for marking. Specify the actual grade, finish and required appearance for VIM50FD. Where the same artwork is needed on different surfaces, show those as separate tasks rather than assuming the broad material list proves each result.
A practical drawing distinguishes the graphic outline, its position on the part and the support for the component. Include access constraints around the marking surface. This information helps discuss a desktop optical arrangement without implying that a fixture is included or that a stated field dimension defines the machine's entire workpiece capacity.
VIM50FD 50W laser marker configuration
Request the selected field lens and range in the quotation, with the 50W model clearly identified. Raycus and IPG are listed generator options; the offer should identify which source is proposed. If alternatives are quoted, keep the optical and source choices visible instead of comparing only the power label.
The file list includes bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Supply the artwork at the intended dimensions and identify the correct version. A preview of its position on the part can accompany the file, while any requested support or positioning accessory should be listed separately.
The usage environment is specified as clean and dust-free or low-dust. The described interlock stops operation when a safety door or panel opens. Review the actual operating documentation and protective arrangements. The module-life value of >100000 Hours is a published field, not a warranty or a tested lifespan for every installation.
Product questions
Do the two ranges mean automatic switching?
No automatic switching mechanism is established here. The table lists 110*110mm and 200*200mm; confirm the actual field lens and supplied optical configuration for the range being proposed.
Is the red dot pointer an autofocus feature?
The source describes visible positioning. It does not establish automatic focus or correction, so ask about the actual setup procedure rather than assigning those functions to the pointer.
How should the 0.15mm field be read?
It is the published minimum character dimension, not a character count. It is not a guarantee that every font and surface will meet a specific readability requirement.
What should accompany a field-selection request?
Provide the artwork dimensions, its location on the component, the actual material and surface finish, and the proposed part support. Identify any required accessories separately from the marker.
Related equipment and information
Ready to discuss VIM50FD?
Share your material, dimensions and process. Start a conversation about the right configuration.