Is VIM100FD the highest power in the published series?
Yes. The table ends at 100W, with VIM70FD at 70W below it. That ranking identifies power choices and does not establish the fastest result or universal suitability.
Laser Marking Machine
VIM100FD — VIM-FD Laser Marking Machine
VIM100FD is the highest listed power model in the VIM-FD desktop fiber laser marking series, at 100W and a wavelength of 1080nm. The next lower entry is VIM70FD at 70W. The highest power position in the table does not establish that it is the best choice for every marking task.
A useful purchasing brief covers the workstation as well as the mark. Identify where the desktop machine will be placed, how the part will be supported and what documentation is needed for operation. Actual equipment dimensions and support requirements should be confirmed before the workplace layout is finalized.
Technical specifications
| Specification | VIM100FD |
|---|---|
| Laser Power | 100W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM100FD fiber laser marking machine structure
The source describes a fiber generator, air cooling, a galvo scanner and a field lens. A red dot pointer provides visible positioning assistance. These components define the published arrangement without supplying a machine weight, a table load requirement or an automatic focusing function.
Speed, power and frequency can be adjusted through the described controls. Use the intended artwork and material information when reviewing the offered interface. A 100W source and adjustable parameters do not establish a marking rate, engraving depth or a preconfigured recipe that applies to all of the parts under consideration.
The table lists a minimum line width of 10 Microns and a minimum character dimension of 0.15mm. Keep those values with the other source specifications. The appearance required from an actual graphic and surface needs its own description; fine-detail fields do not by themselves define a complete acceptance standard.
VIM100FD work preparation
Metals, plastics and ceramics are named as intended marking materials. Provide the exact substrate and finish for VIM100FD, with the graphic location and required appearance. The list is a statement of intended use, rather than a completed trial on your grade, coating or component.
Show the way the part will reach the marking position and how it will be held there. Include any obstruction around the surface to be marked and any support you require. Desktop construction does not assign unlimited part dimensions or confirm that an existing bench meets the requirements of the offered equipment.
VIM100FD 100W laser marker configuration
The stated usage environment is clean and dust-free or low-dust. Keep that requirement in the workstation brief alongside access and support details. Air cooling is part of the published configuration, but the description does not provide a continuous running duration or replace the operating instructions for the supplied machine.
Raycus and IPG are the generator options listed with marking ranges of 110*110mm and 200*200mm. Identify the chosen source and optical setup in the offer. The supported-format list includes bmp, jpg, gif, png, tif, ai, dxf, dst and plt; supply the correct artwork version with its dimensions.
Laser Module Life is published as >100000 Hours. This is a source specification field, not a warranty period or a measured lifespan for the complete installation. The configuration also describes an interlock that stops operation when a safety door or panel opens; review its actual arrangement and the workplace protection in the supplied documentation.
Product questions
Does >100000 Hours state the warranty?
No. It is the source table's Laser Module Life field. Warranty coverage, maintenance requirements and the life of the assembled machine are separate matters not established by that number.
What workplace environment is specified?
The source calls for a clean and dust-free or low-dust environment. Include the planned location and operating conditions in the configuration discussion and obtain the applicable machine instructions.
Are both optical ranges supplied with VIM100FD?
The table lists 110*110mm and 200*200mm as choices. Confirm the selected lens and field in the offer; the list does not establish two complete optical configurations in the package.
What support information should be confirmed?
Request the actual equipment dimensions and support requirements, and show how the workpiece will be held. Identify required fixtures or accessories separately instead of assuming they are part of the desktop marker.
Related equipment and information
Ready to discuss VIM100FD?
Share your material, dimensions and process. Start a conversation about the right configuration.