How does VIM30FD compare with neighboring models?
It lists 30W between VIM20FD at 20W and VIM50FD at 50W. All three share the 1080nm wavelength entry; no proportional marking-speed claim follows from those power values.
Laser Marking Machine
VIM30FD — VIM-FD Laser Marking Machine
VIM30FD is the 30W desktop model in the VIM-FD fiber laser marking family, with a listed wavelength of 1080nm. Its adjacent power choices are VIM20FD at 20W and VIM50FD at 50W. The model entry supplies a clear starting point for comparing the three proposed configurations.
Use one job brief for that comparison. Keep the material, surface finish, graphic dimensions and desired appearance identical across the offers, then identify the power and selected equipment in each. A change from 20W to 30W or 50W does not by itself establish a proportional increase in marking speed.
Technical specifications
| Specification | VIM30FD |
|---|---|
| Laser Power | 30W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM30FD fiber laser marking machine structure
The common desktop structure includes a fiber generator, air cooling, a galvo scanner and a field lens. A red dot pointer gives a visible reference for positioning. In a comparison schedule, list the actual optical arrangement as well as the model; the 30W label does not identify every selected component.
Speed, power and frequency are adjustable marking parameters in the published control description. Ask how the proposed interface presents the settings for the job under discussion. No frequency-range number, automatic process library or external production-system interface is assigned here, so those items should not be assumed from the control description.
The table gives a minimum line width of 10 Microns and a minimum character dimension of 0.15mm. These are published specification fields. They do not establish that every graphic, field choice and surface combination will produce the same visible detail or satisfy your inspection requirements.
VIM30FD work preparation
Metals, plastics and ceramics are the intended marking materials named for the series. A useful comparison identifies the specific substrate and any surface treatment. If two parts use different finishes, describe them as separate requirements even when the artwork is the same; do not treat one material label as a tested result.
Include the marking position and the way the component will be supported at the desktop machine. Show any part of the workpiece that limits access to the desired surface. These drawings help define the actual task behind the power comparison, without implying that the machine includes a particular fixture or unlimited part clearance.
VIM30FD 30W laser marker configuration
Raycus and IPG are listed as generator options. The marking-range entries are 110*110mm and 200*200mm. Identify the source, lens and selected field in each offer so the VIM30FD comparison does not mix a power decision with unrecorded optical or source differences.
The supported-format list includes bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Keep the actual artwork version and dimensions with the equipment schedule. State which supports or accessories are requested separately, rather than treating a broad desktop description as a complete workstation supply package.
The stated environment is clean and dust-free or low-dust. A door or panel interlock is described as stopping operation when opened. Obtain the applicable operating instructions. The table's Laser Module Life entry of >100000 Hours remains a source specification field, not a warranty period or a promise about the assembled machine.
Product questions
Is a frequency adjustment range provided?
The controls are described as allowing frequency adjustment, together with speed and power. No numerical frequency range is assigned here, so confirm the actual offered control specifications.
Are Raycus and IPG fitted together?
They are named generator choices in the source table. Ask which source is included in the proposed VIM30FD configuration rather than reading the list as two generators supplied together.
What makes the optical comparison clear?
Identify the selected field lens and whether the proposal uses the 110*110mm or 200*200mm range. Keep the same artwork and material information with each configuration being considered.
Does the module-life field define warranty coverage?
No. The >100000 Hours figure is a published Laser Module Life field. It does not state a whole-machine warranty, maintenance schedule or measured operating life for a particular installation.
Related equipment and information
Ready to discuss VIM30FD?
Share your material, dimensions and process. Start a conversation about the right configuration.