What defines VIM20FH in the FH range?
It is the 20W handheld entry with a listed wavelength of 1080nm. The same family also contains 30W, 50W, 60W, 70W and 100W versions; the power list does not rank them for every marking job.
Laser Marking Machine
VIM20FH — VIM-FH Laser Marking Machine
VIM20FH is the 20W handheld fiber laser marking model in the VIM-FH range, with a published wavelength of 1080nm. Its starting point is part identification: deciding which text, serial number or logo belongs on the workpiece and showing where the operator will place the marking head.
For an enquiry, attach the artwork to a drawing of the actual part. Include the dimensions of the mark and its orientation relative to an identifiable edge or feature. This gives the configuration discussion a practical reference without assuming that a lower power selection automatically produces finer characters or suits every surface.
Technical specifications
| Specification | VIM20FH |
|---|---|
| Laser Power | 20W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM20FH fiber laser marking machine structure
The FH description identifies a handheld arrangement with a fiber laser generator, air cooling, a galvo scanner and a field lens. The published design supports a discussion about bringing the head to the intended marking position. Head dimensions, weight and access around the part still need to be checked against the offered configuration.
A red dot pointer supplies a visible position reference for aligning the material or marking area. The control system provides setting adjustments and monitoring. Neither description establishes automatic focusing or automatic correction of the workpiece position, so specify any required locating method separately when preparing the workstation.
The technical table lists Minimum Line Width as 10 Microns and Minimum Characters as 0.15mm. These are different dimensions. They do not define how many characters fit in a serial number, guarantee a particular font on every material or replace review of the actual artwork at its intended size.
VIM20FH work preparation
Metals and plastics are the material examples in the source description. Serial number engraving, logo marking and part identification are its stated uses. Supply the exact material grade and surface condition for your proposed job; these broad examples are an application scope, not a completed test on your component.
For identification work, show a representative complete text string rather than only a single character. If the content changes between parts, describe that requirement along with the desired position. This is useful enquiry information; no database connection or automatic serial-number workflow is specified for the VIM20FH here.
VIM20FH 20W laser marker configuration
The listed marking range choices are 110*110mm and 200*200mm, and the generator options are Raycus and IPG. Ask the supplier to identify the selected generator and lens in the quotation. Two published ranges do not mean that every delivered arrangement changes between them without an optical or setup change.
Graphic formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Send the file together with its intended physical dimensions and a placement drawing. Record how the component will be supported and which side the head must approach, especially if neighbouring features might obstruct that position.
The published environment is clean and dust-free or low-dust. The described interlock stops the machine when a safety door or panel opens. Review the installation protection and operating instructions for the actual station. The Laser Module Life entry of >100000 Hours is a source specification, not a whole-machine warranty.
Product questions
Does 0.15mm describe a character count?
No. It is the Minimum Characters dimension in the table. Supply the full text and font size so the required mark can be considered in its actual layout.
Does handheld mean battery operated?
The source establishes a handheld design but does not specify battery operation. Request the electrical connection requirements and the complete supplied equipment list for your intended working position.
What should accompany the artwork?
Provide its finished dimensions, material and surface details, and a drawing showing the location on the component. Include the proposed support and head approach so placement can be discussed with the configuration.
What interlock action is described?
The machine is described as stopping when a safety door or panel opens. That specific action does not establish certification or complete protective measures for every proposed handheld workstation.
Related equipment and information
Ready to discuss VIM20FH?
Share your material, dimensions and process. Start a conversation about the right configuration.