Is VIM150CS the highest listed power in the range?
Yes. The VIM-CS table ends at 150W for VIM150CS. The next lower entry is VIM100CS at 100W, and both list a 10.6 μm wavelength.
Laser Marking Machine
VIM150CS — VIM-CS Laser Marking Machine
VIM150CS is the 150W model at the upper end of the VIM-CS split CO2 laser marking range. Its listed wavelength is 10.6 μm. The next lower entry is the 100W VIM100CS, while the family begins with 30W, 40W and 60W choices.
The CS source or marking unit is separated from the controls. For buyers considering the 150W entry, the useful layout questions concern the marking position, part support and operator access. Put these on a drawing and request the actual unit dimensions and connections before deciding where each part of the equipment will sit.
Technical specifications
| Specification | VIM150CS |
|---|---|
| Laser Power | 150W |
| Laser Wavelength | 10.6 μm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM150CS CO2 laser marking machine structure
A CO2 tube, air cooling device, galvo scanner and field lens are named in the series configuration. The red dot pointer provides a visible positioning reference. Ask for the selected field and lens to be stated with the VIM150CS offer so the power entry and optical configuration remain linked.
The controls are described with settings, adjustment and real-time monitoring. Provide representative artwork and explain any differences between jobs, including changes in the graphic position or part orientation. The proposed interface can then be reviewed around those requirements without assuming a particular software system or data integration.
The highest listed power is not a promise of the best result for every material. Compare VIM150CS with the 100W entry using the same workpiece and appearance requirements. The model table does not assign engraving depth, marking duration or a production-rate advantage to the 150W choice.
VIM150CS work preparation
Plastics, glass and ceramics are named for marking and engraving in the series description. State the exact material and finish for your task, and provide the dimensions of the surface receiving the graphic. If appearance requirements differ between parts, describe those differences instead of treating a material name as a result specification.
Split construction makes the relationship between equipment positions worth planning explicitly. Show the workpiece support, access around the marking face and the preferred control location. Separated units do not establish a maximum workpiece size or weight capacity; any particular handling requirement needs to be included in the proposed arrangement.
VIM150CS 150W laser marker configuration
The offer should identify the actual optics and selected working area. No marking-field dimension or minimum character size is assigned to VIM150CS here. Provide the artwork at the size you intend to use, including fine details that matter to the discussion, rather than relying on the 150W label alone.
The described interlock stops the machine if a safety door or panel opens. Review the operating instructions and protective provisions for the planned work position. Air cooling is listed as part of the arrangement, but no continuous working duration or whole-installation safety classification is established by these component descriptions.
Keep supports and requested accessories separate in the purchasing scope, and confirm the actual connections between units. No connection length is assigned on this page. A proposal that identifies the 150W machine, optics, controls and installation requirements gives the layout discussion a concrete basis without making assumptions from the word split.
Product questions
Does the source give a connection length?
No numerical connection length is assigned. Show the desired marking and control positions and request the actual connecting arrangement before fixing the workstation layout.
Which materials are described as intended uses?
The source names plastics, glass and ceramics for marking and engraving. Provide the actual grade, finish and desired appearance; no result on an individual workpiece is established here.
Can 150W be converted into a marking-speed claim?
No marking-speed value is assigned to this model. Keep the material, artwork and appearance requirements consistent when discussing VIM150CS and the lower power choices.
What belongs with the configuration enquiry?
Include the artwork dimensions, part drawing, support arrangement and intended equipment positions. Request the selected optics, actual connections and operating documentation, with any additional accessories identified separately.
Related equipment and information
Ready to discuss VIM150CS?
Share your material, dimensions and process. Start a conversation about the right configuration.