What is the VIE6025T cutting area?
The table lists 6000*2500mm, the largest area dimensions in the VIE-T table. The value is used for the sheet-area comparison.
Tube And Sheet Laser Cutting Machine
VIE6025T — VIE-T Laser Cutting Machine
VIE6025T specifications list a 6000*2500mm cutting area, the largest pair of area dimensions in the VIE-T model table. The series is classified for tube and sheet laser cutting, and the published power range is 1500-20000W. A proposed configuration still needs to address the actual sheet and tube jobs.
Start by explaining why the larger sheet format is required and what tube work accompanies it. A broad combined-equipment request leaves important details open. Separate the confirmed drawings and stock formats from future possibilities, then ask for a configuration response that names the requirements it addresses.
Technical specifications
| Specification | VIE6025T |
|---|---|
| Cutting Area | 6000*2500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIE6025T cutting area and model differences
The VIE6025T cutting area changes both dimensions of VIE3015T's 3000*1500mm entry. Compared with VIE6015T at 6000*1500mm, the change is in the second dimension. Those comparisons describe sheet areas; they do not identify maximum tube section sizes or tube loading lengths.
The specification lists maximum acceleration of 1.3G and Z axis travel of 300mm. Positioning Accuracy and Repositioning Accuracy are 0.05mm and 0.03mm respectively. Record the labels with the values, and describe the required finished-part dimensions separately on the sheet and tube drawings.
Where one unusually large sheet part drives the model selection, include the ordinary workload as well. The area table does not state a production rate for either group. Ask about the actual job mix using its materials, thicknesses, quantities and drawings rather than estimating output from the size of the area.
A combined project brief for a VIE6025T fiber laser cutting machine
A VIE6025T fiber laser cutting machine project can use a shared requirement list with separate sections for sheet and tube work. Each sheet entry needs stock dimensions, material, thickness and a drawing revision. Each tube entry needs section shape, outside dimensions, wall thickness, material, incoming length and finished features.
Identify which requirement is essential to the purchase and which is provisional. A future tube drawing may be less settled than the current sheet workload, or the reverse. Keeping that distinction visible helps avoid presenting an undeveloped requirement as though it had already received a technical response.
Ask for tube-specific confirmation against the workpiece description. The 6000*2500mm sheet-area entry is not a substitute for that response. If section or loading information remains unanswered, retain it as an open question in the inquiry instead of borrowing a limit from another machine family.
VIE6025T configuration against confirmed requirements
The VIE6025T configuration lists Raytools, WSX, BOCI and Osprey head choices, Raycus, MAX and IPG generators, and CypCut or Weihong controls. Have the selected power and component combination written into the proposal. The source's alternatives do not describe multiple brands installed simultaneously.
The servo motor and driver row lists Fuji, Delta and Yaskawa. The rail entry is Taiwan Linear Rails, with Japan Shinbo or France Mortori reducer alternatives. Use a separate field for each selected item when comparing quotations so a configuration revision remains visible to both technical and purchasing staff.
Include the destination and the installation information needed for your premises when sending the brief through the contact page. Overall equipment dimensions and site arrangements require separate details from the cutting area. The series page can support a renewed sheet-size comparison if the requirements change.
Product questions
How does VIE6025T differ from VIE3015T?
VIE3015T lists 3000*1500mm. Both area dimensions change in the VIE6025T entry, while tube requirements still need their own confirmation.
Does the largest sheet area establish the largest tube capacity?
No such conclusion follows from this table. Supply the tube section, stock length and drawing and ask for the proposed arrangement to be confirmed.
What power should appear in a specific quotation?
The source range is 1500-20000W. A specific offer should identify its selected power rating, generator and other components.
How should future work be included in the brief?
Mark the provisional requirements separately from the confirmed jobs, with their current drawings and open questions. That keeps the basis of the proposed equipment clear.
Related equipment and information
Compare VIE-T Laser Cutting Machine models
Ready to discuss VIE6025T?
Share your material, dimensions and process. Start a conversation about the right configuration.