VIE4015T — VIE-T Laser Cutting Machine

The VIE4015T cutting area can also be compared with VIE6025T at 6000*2500mm, where both area dimensions change. If only a longer format with the same second dimension is under consideration, VIE6015T lists 6000*1500mm. State the actual sheet requirement behind each model on your shortlist.

Maximum acceleration is 1.3G for VIE4015T, and Z axis travel is 300mm. The separate Positioning Accuracy and Repositioning Accuracy entries are 0.05mm and 0.03mm. Keep these fields labeled in your comparison rather than combining them into an unsupported finished-part accuracy statement.

An area or motion specification cannot describe the intended job mix by itself. A drawing with a longer outline may raise a different question from a collection of smaller parts. Provide the drawings and quantities that led to the shortlist instead of treating the model change as proof of a production result.

For a VIE4015T fiber laser cutting machine inquiry, separate sheet drawing revisions from tube drawing revisions. Give each file its material, thickness or wall thickness, stock description and required quantity. This prevents a combined project from becoming a single file list with unclear workpiece requirements.

The tube brief should identify the section shape and outside dimensions as well as incoming length and required features. Ask the supplier to confirm the proposed arrangement for that work. None of those limits can be taken from the 4000*1500mm sheet-area entry.

If the sheet requirement is firm but the tube work is still being developed, mark that difference. Ask for a clear response to the current drawings and keep provisional requirements in a separate part of the brief. The proposal can then show which questions have been answered and which remain open.

The VIE4015T configuration lists Raytools, WSX, BOCI and Osprey head alternatives; Raycus, MAX and IPG generator alternatives; and CypCut or Weihong controls. Request a definite selection together with the proposed power rating. The published range and brands should not be mistaken for a fully agreed component package.

Fuji, Delta and Yaskawa are the servo motor and driver choices listed in the table. The rails are described as Taiwan Linear Rails, and the reducers as Japan Shinbo or France Mortori. Record the selected components with the model name so a revised offer can be compared against the previous version.

When contacting the supplier, include the destination and the installation information you need for the combined project. Overall machine dimensions and site arrangements require their own response. Use the VIE-T series page if the sheet dimensions change and you need to reconsider the area selection.