VIE4020T — VIE-T Laser Cutting Machine

The VIE4020T cutting area differs from VIE3015T in both dimensions: 4000*2000mm versus 3000*1500mm. Identify which stock format motivates that comparison. If a different width is the important point, include the full sheet dimensions in the brief instead of referring only to the longer entry.

The table lists maximum acceleration at 1.3G and Z axis travel at 300mm for VIE4020T. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. These are separate machine specification fields, not a published output or finished-part result for the intended sheet and tube jobs.

For the tube portion of the project, request confirmation against the actual section and stock description. The 4000*2000mm Cutting Area does not supply a tube diameter, section-size limit or loading length. Keep those unanswered requirements visible instead of borrowing values from the sheet-area row.

A VIE4020T fiber laser cutting machine inquiry can be organised around two representative drawings, one for each workpiece type, followed by any other requirements. Each sheet drawing needs its material, thickness, stock dimensions and revision. Each tube drawing needs the section description, outside dimensions, wall thickness, material and incoming length.

Explain whether the wider sheet format or the tube work led to the combined-machine inquiry. That tells the supplier what needs particular attention in the response. It does not establish suitability by itself; ask for the proposed arrangement to be reviewed against both sets of requirements.

If several departments contribute files, use a consistent reference for each job and mark its revision. A tube part and a sheet part may belong to the same assembly but still need distinct workpiece information. Keeping them separate prevents the assembly description from obscuring the equipment questions.

The VIE4020T configuration lists Raytools, WSX, BOCI and Osprey head alternatives. Raycus, MAX and IPG are the generator choices, with CypCut and Weihong controls. Confirm which power rating and component combination is proposed, rather than accepting a quotation that leaves every selection as a list.

The servo motor and driver row includes Fuji, Delta and Yaskawa. The rail entry is Taiwan Linear Rails, and the reducers are listed as Japan Shinbo or France Mortori. Use these fields to record the actual offer; multiple alternatives in the source do not imply that all are supplied together.

Send the combined drawing brief through the contact page and request the installation information needed at the destination. The series page provides the other sheet-area entries if that part of the requirement changes. Keep the tube confirmation questions attached to the project even when the sheet model shortlist is revised.