Does VIE6015T specify a 6000mm tube loading length?
The published 6000*1500mm value is a Cutting Area entry. It should not be converted into a tube loading-length claim.
Tube And Sheet Laser Cutting Machine
VIE6015T — VIE-T Laser Cutting Machine
VIE6015T specifications list a 6000*1500mm cutting area and a 1500-20000W power range in the VIE-T combined tube and sheet cutting series. The area shares its 1500mm entry with VIE3015T and VIE4015T, while the other dimension is 6000mm. Tube requirements need their own workpiece description.
Use this model inquiry to separate two kinds of length: the sheet-area dimension shown in the table and the incoming tube length in your project. They are not interchangeable. State the sheet formats and tube stock independently before asking how the proposed equipment should be configured.
Technical specifications
| Specification | VIE6015T |
|---|---|
| Cutting Area | 6000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIE6015T cutting area and length comparisons
The VIE6015T cutting area can be compared with VIE3015T at 3000*1500mm when the sheet requirement keeps the same second dimension. VIE6025T lists 6000*2500mm if the comparison concerns a different width. Choose the model comparison that follows your intended stock formats, and preserve both dimensions in the record.
Maximum acceleration is 1.3G and Z axis travel is 300mm. Positioning Accuracy is listed at 0.05mm, with Repositioning Accuracy at 0.03mm. These source fields remain distinct from the dimensional and production requirements on your drawings; they do not establish a tested result for the proposed jobs.
Do not use the 6000mm area entry to fill in an unanswered tube-length question. The source row is labeled Cutting Area. Describe the tube stock you plan to use and request confirmation of the proposed arrangement, including the section and features shown on the drawing.
Separate job lists for a VIE6015T fiber laser cutting machine
For a VIE6015T fiber laser cutting machine purchase, list long sheet jobs separately from tube jobs. Sheet entries should identify stock size, material grade, thickness and finished-part drawing. Tube entries should identify section shape, dimensions, wall thickness, material, incoming length and the required features.
Group the drawings by confirmed revision and quantity, rather than assuming that a common assembly name explains every part. If one long sheet component is the main reason for the model choice, say so. If the tube workload is equally important, include representative tube drawings at the start of the discussion.
A later change to tube stock does not automatically change the sheet-area comparison, and a revised sheet format does not define the tube requirement. Keep each change visible in the project brief. This helps the supplier respond to the actual revised requirement without relying on an earlier description.
VIE6015T configuration and project revisions
The VIE6015T configuration offers listed head alternatives from Raytools, WSX, BOCI and Osprey. Generator alternatives are Raycus, MAX and IPG; the controls are CypCut or Weihong. Ask for a definite selection and a specific power rating within the published range for the proposed machine.
Fuji, Delta and Yaskawa appear in the servo motor and driver row. Taiwan Linear Rails is the rail description, and Japan Shinbo or France Mortori are the reducer alternatives. Keep the selected components with the model and drawing references so a quotation revision can be checked consistently.
Request the overall equipment dimensions and installation information needed for the destination. The cutting area is not a footprint or a description of tube loading arrangements. Use the VIE-T series page for a different sheet-area comparison and the contact page for the project-specific configuration questions.
Product questions
What changes from VIE3015T in the area table?
VIE3015T lists 3000*1500mm and VIE6015T lists 6000*1500mm. Their 1500mm area dimension remains the same.
Which model keeps the 6000mm entry with a different width?
VIE6025T lists 6000*2500mm, compared with 6000*1500mm for VIE6015T.
What information belongs in the tube brief?
Include section shape, dimensions, wall thickness, material, incoming length and the part drawing. Ask for a specific response to those requirements.
How should sheet and tube changes be handled?
Identify which workpiece requirement changed and provide the revised drawing or stock description. Keep the selected equipment configuration and remaining questions attached to that revision.
Related equipment and information
Compare VIE-T Laser Cutting Machine models
Ready to discuss VIE6015T?
Share your material, dimensions and process. Start a conversation about the right configuration.