What working area is specified for VIC1610E?
The published rectangle is 1600*1000mm. Check the full layout in its intended orientation and provide object height separately.
Laser Cutting Machine
VIC1610E — VIC-E Laser Cutting Machine
VIC1610E is the 1600*1000mm working-area model in the VIC-E CO2 laser cutting family. The series description includes an electric lifting table for adjusting workpiece height. A CO2 head and tube, linear guides, stepper motors and belt drive are also described, while the technical table lists an 80-600W power range.
Keep the orientation of the work visible when comparing table sizes. The rectangle required from above and the height of the supported object are different selection questions. Supply both views with the intended artwork so that a proposed setup can be reviewed without assuming that a size choice also settles the vertical arrangement.
Technical specifications
| Specification | VIC1610E |
|---|---|
| Working Area | 1600*1000mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC1610E working area and equipment structure
The VIC1610E working area measures 1600*1000mm. VIC1318E lists 1300*1800mm, making it longer in the second listed dimension but shorter in the first. Compare the actual orientation of the blank or layout with each rectangle. A single description such as larger table would hide that dimensional difference.
The electric lifting table changes workpiece height. No numerical stroke or load rating is provided in the admitted description. Include any planned support beneath the object when explaining the setup, and ask what adjustment range is offered. The height-adjustment feature does not itself establish automatic focusing or suitability for every object size.
Knife or honeycomb support surfaces are listed as alternatives. Specify the preferred arrangement with the material and part shapes in mind. If visible positioning is required, an optional red dot pointer is described. Record that request and the selected table in the same equipment schedule so their status is clear.
Planning work with VIC1610E electric lifting table
Cutting and engraving are the stated uses, with acrylic, wood and plastics named as material examples. Provide the actual grade and thickness, and identify any orientation requirement in the artwork or material. The published examples do not supply a thickness limit or a tested finish for the job under discussion.
Suppose an object could fit within one rectangle when rotated, but its planned support fixes it in a particular orientation. Send the allowed arrangement, including the support outline and side view. Ask how the table and positioning method would accommodate it. A rotated outline on screen alone would leave that constraint unexplained.
VIC1610E configuration
Ruida control with a USB interface is listed, and graphic formats include PLT, DXF, BMP, JPG and AI. Identify units, scale and drawing revision. Where the artwork has a required direction or location on the object, annotate it explicitly rather than expecting the file name or a photograph to communicate the relationship.
The power supply entries are 220V/50HZ and 110V/60HZ. Confirm the version for your site along with the selected laser power. Ask the offer to identify the support surface and any optional positioning equipment. A published range of electrical and laser choices is not a complete specification for a particular delivery.
Position Accuracy is listed at 0.01mm, Repetition Accuracy at 0.02mm and Cutting Speed at 150mm/s. Define the required finished dimensions, appearance and production target separately from those fields. Keep these requirements with the orientation and height information so the proposal addresses one consistent description of the work.
Product questions
Is VIC1318E larger in every direction?
No. VIC1318E lists 1300*1800mm, compared with 1600*1000mm for VIC1610E. The first and second dimensions change in opposite directions.
Does the lifting table have a stated load limit?
The admitted description does not provide a numerical load rating or stroke. Ask for these details against the actual object and support arrangement.
What positioning option can be requested?
A red dot pointer is described as optional and projects a visible point onto the material. Have its inclusion identified in the proposed equipment schedule.
What helps assess a fixed-orientation setup?
Send the permitted layout, support outline, side view, material details and artwork position. Explain which orientation constraints must remain unchanged during the equipment discussion.
Related equipment and information
Ready to discuss VIC1610E?
Share your material, dimensions and process. Start a conversation about the right configuration.