What working area belongs to VIC1325E?
The published area is 1300*2500mm. Check the complete blank and layout, identifying any planned support outline separately.
Laser Cutting Machine
VIC1325E — VIC-E Laser Cutting Machine
VIC1325E is a CO2 laser cutting model with a 1300*2500mm working area. The VIC-E series description identifies an electric lifting table for adjusting workpiece height, plus a CO2 head and tube, linear guides, stepper motors and belt drive. Published laser power extends from 80-600W in the specification table.
Use the intended support arrangement as part of the equipment brief. A drawing can show the finished shapes without explaining how the blank or object will rest on the table. Include that information with the artwork, overall dimensions and height so that the proposed configuration is discussed against the complete setup.
Technical specifications
| Specification | VIC1325E |
|---|---|
| Working Area | 1300*2500mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC1325E working area and equipment structure
The VIC1325E working area is 1300mm by 2500mm. VIC1318E lists 1300*1800mm, and VIC1530E lists 1500*3000mm. Compare the actual layout with these rectangles. Keep the workpiece outline distinguishable from any planned support, and request the external equipment dimensions separately for planning the installation location.
Knife or honeycomb work surfaces are listed as alternatives, while the electric lifting table provides workpiece-height adjustment. State the surface you want considered and supply a side view of the supported object. No lifting stroke or load rating is given in the admitted description, so confirmation is needed for that complete arrangement.
The optional red dot pointer projects a visible point onto the material for positioning. Explain which reference edge or artwork location matters to the job, then ask for the intended positioning arrangement to be identified. The pointer and lifting table descriptions do not establish automatic focusing or a guaranteed setup time.
Planning work with VIC1325E electric lifting table
Cutting and engraving are described uses, with acrylic, wood and plastics named as examples. Identify the actual material grade and thickness rather than relying on a broad category name. Include the required edge or engraved appearance and any relevant dimensional limits; the source does not provide tested settings for the proposed material.
Suppose the purchasing team is comparing two possible support arrangements for the same object. Send a drawing of each arrangement and keep the material and artwork unchanged between them. Ask which setup the proposed table specification addresses. This distinguishes a change in support from a change in the processing requirement.
VIC1325E configuration
The control entry is Ruida with a USB interface. PLT, DXF, BMP, JPG and AI appear in the graphic format list. Give the artwork and object drawings identifiable revisions, with units and scale stated. An annotated assembly view can explain the relationship between the object, support and intended cutting or engraving location.
Supply entries are 220V/50HZ and 110V/60HZ. Specify the version required at the destination and ask for the selected laser power within the published range to be named. Record the chosen work surface and optional equipment in the same schedule so that different quotations describe comparable configurations.
Position Accuracy is listed as 0.01mm, Repetition Accuracy as 0.02mm and Cutting Speed as 150mm/s. Those fields are separate from the required result on a particular object. Keep finished dimensions, visual requirements and any production target attached to the current drawing and support arrangement for a meaningful equipment discussion.
Product questions
Which larger rectangle appears in the same family?
VIC1530E lists 1500*3000mm. Compare both dimensions and confirm the proposed height and support arrangement before selecting that alternative.
What does the source say about table lifting?
It describes adjustment of workpiece height. Numerical travel and load capacity are not stated in the admitted description and need confirmation for the proposed setup.
Are knife and honeycomb surfaces both included?
They are listed as alternatives. Have the chosen surface identified in the quotation together with any separately requested positioning option.
How should alternative supports be compared?
Send a drawing of each supported arrangement while keeping material, artwork and required result consistent. Identify which version each equipment proposal is intended to address.
Related equipment and information
Ready to discuss VIC1325E?
Share your material, dimensions and process. Start a conversation about the right configuration.