What area is listed for VIC1318E?
1300*1800mm. Compare the full blank or layout with both dimensions and distinguish it from the side-view height information.
Laser Cutting Machine
VIC1318E — VIC-E Laser Cutting Machine
VIC1318E combines a published 1300*1800mm working area with the VIC-E family's electric lifting table for workpiece-height adjustment. The series uses a CO2 laser configuration described with a head and tube, linear guides, stepper motors and belt drive. The technical table lists an 80-600W laser power range.
For a layout extending along the second listed dimension, compare the complete blank with the working rectangle before considering height adjustment. Identify whether the enquiry concerns one long object or several pieces arranged together. Those are different descriptions of the work even when the outer layout dimensions are similar.
Technical specifications
| Specification | VIC1318E |
|---|---|
| Working Area | 1300*1800mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC1318E working area and equipment structure
The VIC1318E working area is 1300*1800mm. VIC1325E lists 1300*2500mm, retaining the same first dimension and extending the second. Compare those entries using a dimensioned layout. They do not specify a loading direction or the external size of the equipment, which should be requested separately for installation planning.
The source describes the electric lifting table as adjusting workpiece height. It does not quantify the available travel or lifting capacity. If the intended setup contains supports beneath the workpiece, show them in a side view and ask for the complete arrangement to be checked against the proposed table specification.
Knife and honeycomb tables are the stated alternatives. The optional red dot pointer provides a visible reference point for positioning material. Identify the selected support surface and whether the pointer is required in the quotation request, so the proposed layout is considered together with the equipment intended to support and position it.
Planning work with VIC1318E electric lifting table
The VIC-E description covers cutting and engraving, naming wood, acrylic and plastics as material examples. Give the actual material specification and thickness for each proposed item. Where the requirement concerns engraving on an object, include the intended location and appearance; the broad material list does not establish a result for that object.
Imagine a layout containing several pieces with a shared artwork reference. Submit the overall arrangement and an individual drawing for each piece, identifying their heights. Ask how the proposed support and positioning arrangement would handle them. The outer rectangle alone would not show those differences between the objects.
VIC1318E configuration
Ruida control with USB is listed, alongside PLT, DXF, BMP, JPG and AI graphic formats. Label the layout and individual drawings with consistent units and revision references. If the artwork is supplied separately, identify which object and position it belongs to so that the full enquiry can be reviewed without guessing the relationship.
The electrical choices shown are 220V/50HZ and 110V/60HZ. State the site supply and have the offer name the appropriate version, selected laser power and worktable. The 80-600W range does not identify the rating of a particular quoted machine until the selection is recorded, and it does not supply a material-thickness capability.
The table lists 0.01mm Position Accuracy, 0.02mm Repetition Accuracy and 150mm/s Cutting Speed. Provide finished-part requirements separately, attached to the relevant object and artwork. Keep any required production rate with the complete job description so it is assessed independently of those individual specification fields.
Product questions
How does VIC1325E differ in area?
Its table entry is 1300*2500mm. The first listed dimension is the same as VIC1318E, while the second is longer.
Is the electric lifting table a height-adjustment feature?
Yes. The description establishes adjustment of workpiece height, but does not specify numerical stroke, load capacity or automatic focusing.
Which worktable surface can be selected?
The table lists knife or honeycomb alternatives. Ask for the chosen surface and any requested red dot pointer to appear in the offer.
What should accompany a layout of several objects?
Include the overall arrangement, individual object drawings and heights, material details and artwork references. Identify the proposed supports and the required result for each item.
Related equipment and information
Ready to discuss VIC1318E?
Share your material, dimensions and process. Start a conversation about the right configuration.