What is the listed difference between VIT6022 and VIT6035?
VIT6022 has a Cutting Area entry of 6000*220mm; VIT6035 has 6000*350mm. The component alternatives and 1000-6000W power range are shared across the two columns.
Tube Laser Cutting Machine
VIT Laser Cutting Machine
VIT is a fiber laser cutting machine series for tube cutting, offered as VIT6022 and VIT6035. The clearest difference in their specification is the Cutting Area row: 6000*220mm for VIT6022 and 6000*350mm for VIT6035. Both columns list 1000-6000W under Laser Power. Choosing between them begins with the tube section and the work to be cut, rather than with a different set of listed component brands.
Keep the name Cutting Area with those dimensions. The table does not define them as a maximum diameter covering every section shape. A round tube and a rectangular section need their own outside dimensions and wall thickness in the inquiry, even when they are intended for the same purchase.
Technical specifications
Choose an individual model below to view its complete technical specification. The series overview shows selected parameters for comparison.
- Cutting Area
- 6000*220mm / 6000*350mm
- Laser Power
- 1000-6000W
Choose a model
VIT6022 and VIT6035 specifications
The optical component fields are shared across the two models. Raytools, WSX, BOCI and Osprey appear under Laser Head; Raycus, MAX and IPG appear under Laser Generator. These names describe alternatives within the VIT specification. The power range is shared as well, so neither model name fixes the power or generator to be supplied.
Control System lists CypCut and Weihong. The separate Servo Motor And Driver row names Fuji, Delta and Yaskawa. Keeping these rows separate is useful when a purchasing specification calls for particular components: a control-system preference does not identify the motor and driver selection.
The remaining mechanical entries name Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Max. Acceleration is 0.6G in both columns. That figure belongs to the machine specification; it is not a cutting speed or an output rate for a tube part.
VIT tube laser cutting machine planning
A tube section describes the stock, but the part drawing describes the job. Mark the holes, slots and end cuts you need, including features on another face. Where orientation matters to assembly, show that relationship on the drawing. Include the drawing revision so a later change to a hole or end detail is not lost in an email exchange.
For a mix of sections, a short part list is helpful. Put the material grade, outside dimensions, wall thickness, incoming length and required quantity against each drawing reference. Separate recurring work from occasional parts. This is a way to define the scope for review, not a claim that every listed section is already approved for the VIT.
VIT components and material handling
The stock route deserves a place in the equipment request. A layout can show incoming lengths, the approach to the proposed machine and the space where finished pieces would be removed. Mark doors, nearby equipment and any handling equipment already on site. Keep these existing items separate from the new supply you want quoted.
For the machine itself, a compact configuration list can follow the table order: model, head, power, generator, control system, motor and driver. Add requested accessories and loading arrangements below it. The VIT table identifies the core fields, but it does not turn an unspecified loading system into a standard included item.
Product questions
Does Cutting Area confirm the largest tube diameter?
The source uses the field name Cutting Area. It does not provide a separate diameter limit for each section shape. Describe the actual section and request clarification for the proposed configuration.
Can the model name tell me which laser generator is included?
No. Raycus, MAX and IPG are listed alternatives for both models. The chosen generator and power need to be identified in the quotation for the individual machine.
Which control systems are listed for VIT?
CypCut and Weihong. They are control-system alternatives, while Fuji, Delta and Yaskawa belong to the separate Servo Motor And Driver field. A proposal should make both selections clear.
Is loading equipment defined by the VIT table?
The table does not specify a complete loading and unloading arrangement. Describe the incoming stock and finished lengths, identify existing handling equipment, and list what additional equipment you want included in the proposal.
Related equipment and information
Ready to discuss VIT Laser Cutting Machine?
Share your material, dimensions and process. Start a conversation about the right configuration.