What is the VIT6035 Cutting Area entry?
The published value is 6000*350mm. Retain the original field label rather than treating the number as a complete set of tube processing limits.
Tube Laser Cutting Machine
VIT6035 — VIT Laser Cutting Machine
VIT6035 specifications identify a 6000*350mm Cutting Area entry in the VIT tube laser cutting table. The published laser power range is 1000-6000W, shared with VIT6022. That other model lists 6000*220mm under the same area label.
The second entry provides a published comparison between the two model columns, but it should not automatically be renamed maximum tube diameter. Describe the intended section and stock length in the inquiry. A specific proposal needs those workpiece requirements as well as a definite power and component selection.
Technical specifications
| Specification | VIT6035 |
|---|---|
| Cutting Area | 6000*350mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1000-6000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.6G |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT6035 cutting area and specification boundaries
The VIT6035 cutting area retains VIT6022's first entry of 6000mm while changing the second from 220mm to 350mm. Keep the two original field values attached to their model names. They do not, by themselves, establish compatibility with every tube shape or a complete loading arrangement.
Maximum acceleration is listed as 0.6G for both VIT models. Use that as a labeled motion field, not a cutting-speed or parts-per-hour statement. If the purchasing decision depends on a particular output, give the drawing and material details with the target you want discussed.
State finished-component tolerances as part of the drawing requirements. An accuracy value from another tube series should not be transferred to this model simply because its name looks similar. Keep the equipment proposal and the required result on the part distinct in the technical conversation.
A job schedule for a VIT6035 fiber laser cutting machine
For a VIT6035 fiber laser cutting machine inquiry, organise the planned work by section and finished feature. Each section record should include shape, outside dimensions, wall thickness, material grade and incoming length. Add drawing revisions and quantities so the supplier can distinguish the different jobs.
Where a single stock section is used for several parts, show the separate drawing references and identify the dimensions that matter for each. The stock description answers one question; the requested holes, outlines or other features answer another. Neither should be omitted from the application brief.
If VIT6022 is also on the shortlist, use the same job records for the comparison. Explain what section or loading question led you to consider VIT6035. Keep provisional future requirements separate from current work, and seek confirmation against the actual description rather than inferring a limit from the area row.
VIT6035 configuration for the defined tube work
The VIT6035 configuration lists Raytools, WSX, BOCI and Osprey heads, Raycus, MAX and IPG generators, and CypCut or Weihong controls. Ask the proposal to state the selected power and the chosen head, source and controls as a defined combination within the published alternatives.
Fuji, Delta and Yaskawa are listed for the servo motor and driver. The table also names Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Multiple alternatives do not mean simultaneous inclusion, so keep the actual selections in the quotation record and identify any revision to them.
Send the job records through the contact page with the loading and installation questions for the destination. The series page provides the two model entries for comparison. Request the overall equipment and site information separately from Cutting Area, which is not a complete machine footprint or handling plan.
Product questions
How does VIT6035 compare with VIT6022?
VIT6022 lists 6000*220mm. The first entry remains the same and the second changes, while the published power range is shared.
Does 350mm confirm every tube shape of that size?
No complete section range is established by the label alone. Supply the actual shape, dimensions and drawing for confirmation of the proposed arrangement.
Can the 0.6G value answer an output question?
It is maximum acceleration. A cutting-time or output question needs the actual material, section, drawing and quantity rather than that motion value alone.
What should be recorded for the proposed equipment?
Identify the model, selected power, head, generator, controls and drives, with the job revisions used for the inquiry. Keep unanswered loading and installation questions visible.
Related equipment and information
Compare VIT Laser Cutting Machine models
Ready to discuss VIT6035?
Share your material, dimensions and process. Start a conversation about the right configuration.