What differs between VIQ1500P and VIQ2000P?
Their laser powers are 1500W and 2000W. Wavelength, fiber length, cleaning width and cooling are shared at 1080nm, 10M, 10-300mm and water cooling.
Laser Cleaning Machine
VIQ-P Laser Cleaning Machine
VIQ-P is a portable continuous wave laser cleaning machine series with a handheld cleaning head. The source explicitly names a continuous laser generator; P is not a basis for calling this a pulsed cleaner. An industrial water chiller and adjustable control system are also described.
There are three models: VIQ1500P at 1500W, VIQ2000P at 2000W and VIQ3000P at 3000W. Rust, paint, coatings and contaminants are the removal uses named in the description. The portable arrangement gives the inquiry a second focus besides power: where the work will take place.
Technical specifications
Choose an individual model below to view its complete technical specification. The series overview shows selected parameters for comparison.
- Laser Power
- 1500W / 2000W / 3000W
- Laser Wave Length
- 1080nm
Choose a model
VIQ1500P and VIQ2000P specifications
VIQ1500P and VIQ2000P share a 1080nm wavelength, 10M fiber length and 10-300mm cleaning width. Water Cooling is listed for both. VIQ3000P keeps those same specification fields at 3000W, so power is the principal listed difference between the three models.
The handheld head provides manual control, while the control system offers monitoring and adjustable cleaning parameters. The source alternatives are Raycus, JPT, IPG and Max. A proposed configuration should identify the selected brand and model power together.
Portability is described, but no machine weight is stated in the approved specification. Explain the intended movement between work locations and how the unit would be positioned. That defines the handling requirement without assigning a transport method from the portable label.
VIQ-P continuous wave laser cleaning machine planning
VIQ-P continuous wave laser cleaning machine planning should make the removal task specific. Identify the material underneath and the rust, coating or contamination above it. Show whether the whole surface or only selected areas need treatment, and describe the condition you want afterwards.
Photographs help show location and extent, but some material details need a written specification. State what is known about the substrate and coating, and label any uncertainty. This avoids turning an appearance into an unsupported material identification.
For work in several locations, attach an access note to each task. Identify the workpiece dimensions, the surfaces to be reached and the proposed machine position. Keep the surface requirement attached to that location, especially where the type of contamination changes from one job to another.
VIQ-P configuration and controls
The 10M fiber entry belongs alongside the location information. Show the route between the proposed unit position and the work, including obstructions or a need to reposition. Fiber length alone is not a complete access plan.
The supported language list is English, Chinese, Japanese, Korean and Russian. Specify the interface language required for the intended users. The equipment request can then name the power model, source, language and working arrangement separately from the details of each surface-cleaning task.
The source describes an emergency stop, a door or panel interlock with a stopping function, and an enclosure for the laser system. These identify hardware and stated actions. The separate handheld work area is not thereby fully enclosed, and the description does not establish a safety certification for the complete installation.
When comparing proposed equipment, keep the same job information with each offer. If one request concerns rust and another concerns a different coating or substrate, make that difference visible. The published applications describe the intended scope; they do not provide a common processing result for every surface.
Product questions
Does the P suffix mean pulsed operation?
No. The product source explicitly describes a continuous laser generator. This series is therefore presented as continuous wave equipment.
What does the portable description establish?
It describes movement between work sites. No weight or specific lifting method is stated, so the intended transport and positioning arrangement should be defined for the project.
What language choices are listed?
English, Chinese, Japanese, Korean and Russian. Identify the language needed by the intended users in the requested configuration.
What helps explain work at several locations?
Provide each task's material, coating or contamination, treatment area and required result. Add access information and planned machine positions so the proposed use is clear.
Related equipment and information
Ready to discuss VIQ-P Laser Cleaning Machine?
Share your material, dimensions and process. Start a conversation about the right configuration.