What is the VIQ1500P laser power?
The published model column gives 1500W. VIQ2000P and VIQ3000P list 2000W and 3000W respectively.
Laser Cleaning Machine
VIQ1500P — VIQ-P Laser Cleaning Machine
VIQ1500P specifications identify the 1500W model in the VIQ-P continuous-wave laser cleaning range. The published table gives 1080nm wavelength, 10M fiber length, water cooling and a 10-300mm cleaning-width range. The P suffix is part of the model identity; the product is classified as CW cleaning equipment.
For an initial inquiry, keep the complete model name with the surface description. State the material beneath the layer to be removed, the visible condition and the result required after cleaning. These details explain the application, while the specification describes the equipment being considered.
Technical specifications
| Specification | VIQ1500P |
|---|---|
| Laser Power | 1500W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | 10M |
| Cooling Mode | Water Cooling |
| Cleaning Width | 10-300mm |
| Support Language | English, Chinese, Japanese, Korean, Russian |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIQ1500P laser power and continuous-wave identity
VIQ1500P laser power is listed at 1500W, compared with 2000W for VIQ2000P and 3000W for VIQ3000P. The other table fields are shared across those model columns. A difference in rated power does not establish a cleaning-rate ratio or prove which setting is appropriate for an unknown surface.
The VIQ-P series description identifies a portable structure, handheld cleaning head, continuous laser generator and industrial water chiller. These are equipment features. They do not provide a published machine weight, a guaranteed continuous working duration or a removal result for every substrate.
The control description includes monitoring and adjustable cleaning parameters. Keep that description distinct from automatic material identification or automatic process selection, neither of which is established here. The 10-300mm cleaning-width field is also a width range, not an area cleaned per hour.
A surface brief for a VIQ1500P CW laser cleaning machine
The VIQ1500P CW laser cleaning machine is part of a series presented for removing rust, paint, coatings and contaminants. Describe the particular layer involved in your project, including any known coating details. Those stated uses are an application starting point, not a test result for every material named in an inquiry.
A useful first brief can combine photographs with the workpiece dimensions, substrate information and required final condition. If the layer composition is unknown, identify that gap rather than guessing. Include whether the work concerns one part or a repeated group so the quantity requirement is clear.
When comparing VIQ1500P with VIQ2000P, keep the same surface and acceptance requirement as the basis. Ask for a response to that actual workpiece. Do not treat a shared cleaning-width range or a higher power entry as evidence of a particular removal speed or damage-free outcome.
VIQ1500P configuration and selected source
The VIQ1500P configuration lists Raycus, JPT, IPG and Max source alternatives. Confirm the source selected for the 1500W model in the proposed offer. Several names in one specification row describe alternatives, not multiple sources installed together in a single machine.
The table lists a 10M fiber and water cooling. Confirm the proposed handheld-head and industrial-chiller package and request the equipment and installation details needed at the destination. Fiber length is not a complete description of usable reach or the arrangement of a particular workplace.
English, Chinese, Japanese, Korean and Russian are the listed supported languages. State which interface language is needed and ask about the parameters relevant to the proposed application. Use the series page for the other VIQ-P power entries and the contact page for the surface and configuration discussion.
Product questions
Does the P suffix mean pulsed cleaning?
No such interpretation is supported here. VIQ-P is listed in the CW cleaning category and its description identifies a continuous laser generator.
Does 10-300mm state the output of the cleaner?
It is the Cleaning Width range, not an area-per-hour or finished-work rate. Output questions need the actual surface and required result.
What control functions are described for VIQ-P?
The description covers monitoring and adjustable cleaning parameters. It does not establish automatic recognition of a material or a guaranteed process setting.
What should accompany the first inquiry?
Provide the substrate, layer to be removed, dimensions, visible condition and required final state. Include photographs and quantity information, and clearly mark any unknown details.
Related equipment and information
Compare VIQ-P Laser Cleaning Machine models
Ready to discuss VIQ1500P?
Share your material, dimensions and process. Start a conversation about the right configuration.