What is the VIQ3000P laser power?
The published model entry is 3000W, the highest of the three powers in the VIQ-P table.
Laser Cleaning Machine
VIQ3000P — VIQ-P Laser Cleaning Machine
VIQ3000P specifications identify the 3000W model in the VIQ-P continuous-wave cleaning range. The table lists 1080nm wavelength, a 10M fiber, water cooling and a 10-300mm cleaning-width range. The series description includes a handheld head, portable structure and industrial water chiller.
The highest power entry in this three-model table still requires a defined application brief. Explain the layer to be removed, the substrate and the condition required after cleaning. Power and cleaning width are equipment fields, not a guaranteed output or a universal result for every surface.
Technical specifications
| Specification | VIQ3000P |
|---|---|
| Laser Power | 3000W |
| Laser Wave Length | 1080nm |
| Laser Source | Raycus, JPT, IPG, Max |
| Fiber Length | 10M |
| Cooling Mode | Water Cooling |
| Cleaning Width | 10-300mm |
| Support Language | English, Chinese, Japanese, Korean, Russian |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIQ3000P laser power and specification boundaries
VIQ3000P laser power is listed as 3000W, compared with 1500W for VIQ1500P and 2000W for VIQ2000P. The shared table rows do not give a proportional removal-rate comparison. Use the actual workpiece information when discussing which proposed configuration addresses the requirement.
The VIQ-P series uses a continuous laser generator and is listed under CW laser cleaning. Its P suffix should not be interpreted as a pulsed-mode claim. The description identifies a handheld cleaning head and industrial water chiller without specifying a guaranteed working duration or a result on an unknown material.
Monitoring and adjustable cleaning parameters are described for the control system. The 10-300mm range remains labeled Cleaning Width. Neither description establishes automatic identification of a substrate, automatic process selection or a fixed area-per-hour output for the application being considered.
Recurring work for a VIQ3000P CW laser cleaning machine
A VIQ3000P CW laser cleaning machine inquiry can organise recurring work into distinct surface groups. The series is presented for rust, paint, coating and contaminant removal. For each group, identify the substrate, layer information, dimensions and required final condition so different workpieces are not treated as one uniform task.
Provide photographs and the quantities associated with each group where available. If a surface description is incomplete, mark the unknown information explicitly. A future requirement that has not yet been defined should remain separate from the confirmed work used for the initial proposal.
When comparing VIQ3000P with VIQ1500P, keep the same representative surface and acceptance requirement. Ask the supplier to respond to that application rather than assuming that the power difference predicts the cleaning result. State any output target as a separate question supported by the workpiece details.
VIQ3000P configuration and interface questions
The VIQ3000P configuration lists Raycus, JPT, IPG and Max source alternatives. Confirm which source is proposed with the 3000W model. An equipment offer should identify the selection instead of leaving several alternative source brands as though they were all installed together.
The table's 10M fiber length and water cooling should stay with the proposed equipment description. Ask for the details of the handheld-head and industrial-chiller package and the installation information needed at the destination. A fiber specification is not a complete workplace layout or a guaranteed usable reach.
Supported languages listed are English, Chinese, Japanese, Korean and Russian. Identify the interface language needed and ask about the relevant adjustable parameters. Use the series page for the power comparison and the contact page to send the grouped surface brief, proposed source preference and remaining questions.
Product questions
How does VIQ3000P compare with VIQ1500P?
The listed powers are 3000W and 1500W. The shared specification fields do not establish a cleaning-rate ratio or an identical result for every surface.
Does the P suffix establish pulsed operation?
No. VIQ-P is presented as continuous-wave cleaning equipment with a continuous laser generator.
Is the width range a throughput guarantee?
The 10-300mm value is Cleaning Width. It does not state an area-per-hour rate or a guaranteed outcome for a particular coating.
What should a recurring-work inquiry describe?
Separate the surface groups, substrates, layers to be removed, dimensions, quantities and required final conditions. Include photographs and make any unknown or provisional details clear.
Related equipment and information
Compare VIQ-P Laser Cleaning Machine models
Ready to discuss VIQ3000P?
Share your material, dimensions and process. Start a conversation about the right configuration.