Where does VIM40CD sit in the power range?
It is the 40W model between VIM30CD at 30W and VIM60CD at 60W. All three list the same 10.6 μm wavelength in the VIM-CD table.
Laser Marking Machine
VIM40CD — VIM-CD Laser Marking Machine
VIM40CD is a 40W CO2 laser marking model in the desktop VIM-CD series. Its listed wavelength is 10.6 μm. Within the family, it sits between VIM30CD at 30W and VIM60CD at 60W, giving a clear power comparison while retaining the same published wavelength.
The common series configuration describes a CO2 tube, air cooling, a galvo scanner and a field lens. The controls support settings, adjustment and real-time monitoring, and a red dot pointer supplies a visible positioning reference. The complete setup should connect those components to the part and graphic being considered.
Technical specifications
| Specification | VIM40CD |
|---|---|
| Laser Power | 40W |
| Laser Wavelength | 10.6 μm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM40CD CO2 laser marking machine structure
The 40W designation is a laser-power choice, not a description of the marking area's dimensions. Establish the proposed field and optical configuration separately. If you are comparing neighbouring power models, keep the artwork, substrate and required appearance unchanged in the enquiry so the comparison addresses one consistent task.
Desktop design places the workpiece arrangement at the centre of the installation discussion. Show how the object rests, which face receives the mark and where the operator can access it. Obtain the actual equipment dimensions before deciding that the complete machine and its loading arrangement fit a particular workbench.
Visible red dot positioning can be reviewed against the reference edges on the workpiece drawing. The control demonstration should then use the intended artwork and those positioning references together. Neither the pointer nor the control description establishes an automatic recognition function or a particular software brand.
VIM40CD marking work preparation
VIM-CD is described for marking and engraving on wood, acrylic, glass and plastic. For VIM40CD, identify the exact material and surface rather than relying on the broad category alone. State the dimensions and appearance required for the mark, especially when the same graphic is intended for more than one substrate.
A set of related parts may share artwork but differ in shape or mark location. Supply a drawing for each relevant setup and distinguish changes in the graphic from changes in the way the object is held. This helps define a useful desktop workflow without assuming that all related parts can use one unchanged arrangement.
VIM40CD 40W laser marker configuration
The proposed VIM40CD schedule should identify the 40W source configuration, field, optics and control arrangement. The page does not assign a marking-area number, software name or character-size limit. These details should be established for the offered equipment rather than copied from another CO2 marking machine.
The equipment description includes air cooling and an interlock that stops operation when a safety door or panel opens. Review the instructions and actual protective setup for the chosen configuration. A listed cooling device does not provide an operating-duration promise, and the interlock description is not a certification for every installation.
Keep the artwork revision and the part drawing together through the selection process. Add the proposed loading and support arrangement, plus any accessories you want supplied. This gives the equipment discussion a defined scope: a particular 40W model, a particular task and a physical station planned with actual dimensions.
Product questions
Does 40W define the marking field?
No. Laser power and field dimensions are different selection items. Request the optical and field configuration proposed for the artwork and workpiece rather than inferring an area from the model.
What positioning feature is described?
The source includes a red dot pointer for visible positioning. Show reference edges and the intended mark location so the alignment discussion uses the actual part geometry.
Which materials can be discussed from the published scope?
The series names wood, acrylic, glass and plastic for marking and engraving. The exact grade, surface treatment and required result should accompany the task information for VIM40CD.
What should be confirmed for a desktop installation?
Confirm equipment dimensions, the proposed field, loading access and workpiece support. Review the controls and operating instructions for the selected arrangement, with requested accessories clearly identified.
Related equipment and information
Ready to discuss VIM40CD?
Share your material, dimensions and process. Start a conversation about the right configuration.