What is the VIH6025 cutting area?
The published value is 6000*2500mm. It shares the 2500mm second dimension with VIH8025 and VIH12025.
Sheet Laser Cutting Machine
VIH6025 — VIH Laser Cutting Machine
VIH6025 specifications list a 6000*2500mm cutting area, a 20000-50000W power range and 1.7G maximum acceleration. The area shares its 6000mm entry with VIH6020, but that model has a different second dimension and a different acceleration value. Keep those distinctions in the equipment comparison.
The purchase can start with a clear question about the required width. Identify the stock formats and drawings that make the 2500mm second area dimension relevant. The power range needs a selected rating in the proposal, and it should not be treated as proof of a cutting-thickness limit for your material.
Technical specifications
| Specification | VIH6025 |
|---|---|
| Cutting Area | 6000*2500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.7G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH6025 cutting area and the 1.7G entry
The VIH6025 cutting area can be compared with VIH12025 at 12000*2500mm if the second dimension is to remain unchanged. VIH8025 lists 8000*2500mm as another length entry in that group. These comparisons describe areas, not the overall dimensions or installation space of the machines.
Maximum acceleration is 1.7G for VIH6025 and VIH8025. VIH6020 and VIH12025 list 1.8G. Avoid assuming a continuous increase or decrease based on area size; use the model-specific entries from the table. None of these acceleration values states a cutting cycle for a particular drawing.
VIH6025 lists 160m/min maximum linkage speed and 330mm Z axis travel. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Keep the original labels in a comparison, with finished-part requirements separately identified on the drawing. Linkage speed is not a material cutting-speed statement.
A width-led brief for a VIH6025 fiber laser cutting machine
For a VIH6025 fiber laser cutting machine inquiry, provide the stock dimensions, material grade, thickness, drawing revision and quantity for the jobs requiring the wider area. Add other routine jobs so the supplier can understand the intended workload rather than just its widest part.
If you are also considering VIH12025, explain which work calls for the different length entry. A confirmed drawing and a provisional future job should not be mixed together without identification. State which requirements are fixed and which questions still need development before a particular configuration is discussed.
Give critical component dimensions their own references on the drawings. Ask for a response to those requirements instead of using the positioning figures as a general finished-part guarantee. Likewise, provide any required output as an application question supported by the actual material and drawing.
VIH6025 configuration for the defined project
The VIH6025 configuration lists Raytools, WSX, BOCI and Osprey head alternatives, with Raycus, MAX and IPG generators. Identify the chosen power rating and the head-source combination in the offer. The presence of several brands in the source does not mean that all are included simultaneously.
The controls are CypCut or Weihong. Fuji, Delta and Yaskawa appear in the servo motor and driver row. Keep these selections in distinct quotation fields so technical and purchasing staff can see what a component revision changes without altering the recorded application requirements.
Taiwan Linear Rails and Japan Shinbo or France Mortori reducers are also listed. Use the series page to compare other VIH areas, and the contact page to send the drawings and configuration questions. Request the overall equipment dimensions and installation information needed for your destination separately from the area table.
Product questions
Does VIH6025 have the same acceleration as VIH6020?
No. VIH6025 lists 1.7G, while VIH6020 lists 1.8G. Both the area and motion fields should be read for the specific model.
How does VIH12025 differ in area?
VIH12025 lists 12000*2500mm. Its second dimension matches VIH6025 while the first changes from 6000mm to 12000mm.
What does 160m/min describe?
It is maximum linkage speed in the source table, not a material cutting speed or a finished-part output for the proposed job.
What should be selected within the power range?
A quotation should identify a specific rating and generator within the published 20000-50000W range, together with the other chosen components and the application brief.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH6025?
Share your material, dimensions and process. Start a conversation about the right configuration.