What cutting area is listed for VIH12025?
The published entry is 12000*2500mm, the largest pair of area dimensions in the VIH table.
Sheet Laser Cutting Machine
VIH12025 — VIH Laser Cutting Machine
VIH12025 specifications list a 12000*2500mm cutting area, the largest pair of area dimensions in the published VIH table. Its laser power range is 20000-50000W and maximum acceleration is 1.8G. The model belongs to the sheet and fiber laser cutting range.
The long area entry needs a clear purchasing reason. Identify the incoming stock and the actual drawings that call for it, separating current requirements from possible future work. A listed area gives a size comparison; it does not establish processing performance, material thickness capability or the installation arrangement at your premises.
Technical specifications
| Specification | VIH12025 |
|---|---|
| Cutting Area | 12000*2500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 20000-50000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.8G |
| Max. Linkage Speed | 160m/min |
| Z Axis Travel | 330mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIH12025 cutting area and acceleration comparison
The VIH12025 cutting area can be compared directly with VIH8025 at 8000*2500mm and VIH6025 at 6000*2500mm. In each comparison, the 2500mm second dimension remains unchanged. Explain which stock formats or drawing requirements motivate a change to the other dimension.
Maximum acceleration for VIH12025 is 1.8G. VIH8025 and VIH6025 list 1.7G, so their values should not be copied into the VIH12025 entry simply because the second area dimension is shared. Keep the model-specific motion values with their original labels in the equipment comparison.
The table lists maximum linkage speed of 160m/min, Z axis travel of 330mm, Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm. Linkage speed is not material cutting speed. The accuracy rows should also remain separate from the dimensional requirements for the actual finished components.
A long-stock brief for a VIH12025 fiber laser cutting machine
For a VIH12025 fiber laser cutting machine inquiry, prepare a job list that explains the long stock requirement. Give material grades, thicknesses, stock dimensions, drawing revisions and quantities. Include regular work as well as the largest component so the proposed equipment is discussed against the intended workload.
Where the long part is still being designed, mark which dimensions are provisional and which requirements are already fixed. Ask for a response to the current revision and retain open questions separately. A future drawing should not appear in the inquiry as though its processing result had already been confirmed.
Identify critical dimensions and any required production output as specific application questions. Provide the relevant drawings rather than deriving those results from motion or power entries. The published 20000-50000W range does not identify a maximum cutting thickness for the material in your project.
VIH12025 configuration for the proposed installation
The VIH12025 configuration lists Raytools, WSX, BOCI and Osprey head alternatives, with Raycus, MAX and IPG generators. Ask for a specific power rating and a named head-source combination in the proposed offer. An option list does not mean multiple alternatives are supplied simultaneously.
Controls are listed as CypCut or Weihong. Fuji, Delta and Yaskawa are the servo motor and driver alternatives. Keep the selected controls and drives beside the model, power and drawing references so a revised quotation can be reviewed without losing the basis of the original inquiry.
The table also gives Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Request overall machine dimensions and installation information for the destination through the contact page. The series page can help compare other area entries, but the Cutting Area value is not a complete footprint or site plan.
Product questions
How does VIH12025 compare with VIH8025?
VIH8025 lists 8000*2500mm. Their second area dimension is shared, while the other entry changes from 8000mm to 12000mm.
What acceleration belongs to VIH12025?
The source lists 1.8G maximum acceleration. The 1.7G values for VIH6025 and VIH8025 should not be transferred to this model.
Can the 160m/min entry be used for a production estimate?
It is maximum linkage speed, not a material cutting-speed or finished-part output figure. Supply the actual application details for that question.
What information is needed beyond the listed area?
Provide the material, thickness, stock format, drawing revision and quantity, then confirm the selected equipment components and request the overall installation information for the destination.
Related equipment and information
Compare VIH Laser Cutting Machine models
Ready to discuss VIH12025?
Share your material, dimensions and process. Start a conversation about the right configuration.