How wide is the VIF6025 cutting area?
The listed area is 6000*2500mm. VIF6020 lists 6000*2000mm and VIF6015 lists 6000*1500mm.
Sheet Laser Cutting Machine
VIF6025 — VIF Laser Cutting Machine
VIF6025 is the VIF sheet fiber laser cutting model with a listed 6000*2500mm Cutting Area. The 2500mm width is the widest in the published six-model table. Two other entries keep the 6000mm dimension: VIF6020 lists 6000*2000mm, and VIF6015 lists 6000*1500mm.
Which width belongs in your request? Write down the sheet sizes you intend to use and compare them with those three entries. If 2500mm is why you're looking at VIF6025, say so. Then send the material, thickness and part drawing; the area alone won't describe the job.
Technical specifications
| Specification | VIF6025 |
|---|---|
| Cutting Area | 6000*2500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF6025 cutting area and motion specifications
Read the smaller-area entries without shortening them. VIF3015 is 3000*1500mm, VIF4015 is 4000*1500mm and VIF4020 is 4000*2000mm. VIF6025 is 6000*2500mm. In these comparisons both dimensions change, whereas comparing VIF6025 with VIF6020 changes the listed width only. Keep the complete figures beside the model names in your purchasing notes.
Laser Power remains 1500-3000W across all six models. The table then gives 0.8G maximum acceleration, 70m/min maximum linkage speed and 100mm Z axis travel. Is 70m/min the answer to a cutting-speed question? No: the row says linkage speed. Discuss cutting requirements with the actual drawing, material and thickness instead of transferring that number to the job.
Positioning Accuracy and Repositioning Accuracy are also distinct labels, with values of 0.05mm and 0.03mm. Carry both into a machine comparison. A finished-part tolerance belongs on the part drawing. Show the feature concerned and ask how it would be assessed for the offered configuration; the table isn't a test report for your workpiece.
Planning sheet work for VIF6025
Describe the incoming sheet and the finished part separately. For the sheet, give the dimensions, material grade and thickness. For the part, send the current drawing and required quantity. If you've shortlisted VIF6025 while still comparing stock sizes, list those alternatives. Keep the 6000*2500mm area attached to the correct model throughout the discussion.
What happens to the part next? Flag the holes, edges or other features that matter for assembly or another operation. Keep each requirement with its drawing revision. This makes the inquiry easier to answer without assuming a material yield, a production rate or a result that hasn't been assessed for your proposed work.
VIF6025 configuration
Name the configuration. VIF6025 shares the VIF head alternatives, Raytools and WSX, and the generator alternatives, Raycus, MAX and IPG. Controls are CypCut, Golden Orange and Weihong. Have the proposal state the chosen items and selected power. Leaving every alternative in the equipment list still leaves you asking which machine is actually being quoted.
The drive rows deserve the same attention. Luoyuan, Fuji and Delta appear under Servo Motor And Driver; Taiwan Linear Rails appears under Guide Rails. Reducer lists Japan Shinbo and France Mortori. Put any preferences in your inquiry. Where two quotations contain different selections, identify those differences before comparing the overall offers.
Add your destination, installation questions and training needs. Ask the response to distinguish the proposed equipment from the support arrangements being discussed. Once you have an offer, compare its stated inclusions with your request and resolve the open points. The model designation isn't a substitute for that final equipment and service scope.
Product questions
What VIF6025 laser power is available in the table?
The published range is 1500-3000W. Ask the equipment proposal to specify the selected power and generator.
Is VIF6025 the widest listed VIF model?
Yes, among the six model columns in this published table. That comparison concerns the stated Cutting Area, not overall machine dimensions.
Which heads are listed for VIF6025 configuration?
Raytools and WSX are the listed alternatives. Confirm which head the quoted equipment includes.
What should I include with a VIF6025 request?
Send stock dimensions, material, thickness, drawings and quantities. Add the destination, component preferences and any installation or training questions.
Related equipment and information
Ready to discuss VIF6025?
Share your material, dimensions and process. Start a conversation about the right configuration.