VIF6015 — VIF Laser Cutting Machine

VIF4020 is another useful reference, at 4000*2000mm. Moving from that entry to VIF6015 changes both dimensions: 4000 becomes 6000mm and 2000 becomes 1500mm. So a question about which model to choose needs more than the opening digits. Show the sheet dimensions you're considering, and attach the drawings that explain what you want to make.

Below the area and power entries, the motion rows give 0.8G maximum acceleration, 70m/min maximum linkage speed and 100mm Z axis travel. What they don't give is a cutting time for your drawing. Keep the figures, but keep their labels too. A linkage-speed specification shouldn't become a promised cutting speed when the inquiry is passed between colleagues.

The accuracy rows read 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. They're separate specifications. Mark a required finished-part tolerance directly on the drawing and ask about it with the proposed machine configuration. That keeps the part's acceptance requirements distinct from the values printed in the machine table.

Why VIF6015? Your inquiry should make the reason visible. Give the incoming sheet dimensions, material grade and thickness, then show the parts you're planning to cut. If several stock sizes are under consideration, include the list. A general description of your industry won't answer the same questions as those dimensions and drawings.

Check the drawing revision before sending it. Mark any feature that will matter in the next operation, and keep the required quantity with each part. A proposal based on one drawing may not address a later change. Keep the working information together, so the discussion stays tied to the job you intend to purchase equipment for.

The component rows give you alternatives to discuss. For Laser Head, they name Raytools and WSX; for Laser Generator, Raycus, MAX and IPG. The control choices are CypCut, Golden Orange and Weihong. Which ones are being offered? Ask for a named selection in the proposal, together with the selected laser power and VIF6015 model.

Luoyuan, Fuji and Delta appear under Servo Motor And Driver. Guide Rails says Taiwan Linear Rails, while Reducer lists Japan Shinbo and France Mortori. Don't lose those entries when comparing two offers. A preferred component can be stated in the request; an offered alternative should be identified clearly enough for you to discuss the difference.

Where will the equipment be installed? Include that destination, and add the commissioning or training questions you want answered. These are requests for the proposal to address. Keep any agreed services visible beside the final equipment list, rather than assume that naming a VIF6015 also defines its installation and support package.