What is the VIF3015 laser power range?
The published range is 1500-3000W. The proposed configuration should identify the selected power and generator rather than leave them as a range.
Sheet Laser Cutting Machine
VIF3015 — VIF Laser Cutting Machine
VIF3015 is the 3000*1500mm model in Victory Industry's VIF fiber laser cutting series. Its cutting area is the smallest of the six areas listed for this series. The published laser power range is 1500-3000W, with choices of laser head, generator and control system in the specification.
Start with your sheet dimensions. The 3000*1500mm entry gives you a clear size to compare against them before discussing the part drawing and the proposed machine configuration. This page keeps the VIF3015 column together; the series page gives you the other five model names if you need a different area.
Technical specifications
| Specification | VIF3015 |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF3015 cutting area and motion specifications
VIF3015 and VIF4015 share a listed 1500mm width, while the other area dimension changes from 3000mm to 4000mm. VIF6015 keeps that width with a 6000mm dimension. If width is the question, VIF4020 and VIF6020 have 2000mm entries and VIF6025 has 2500mm. Keep those model numbers attached to the figures as you compare them.
The VIF3015 specification lists maximum acceleration at 0.8G, maximum linkage speed at 70m/min and Z axis travel at 100mm. They're separate motion fields. A parts-per-hour figure or a cutting time for your drawing isn't given by those entries; ask for the application to be reviewed with its material and cutting requirements.
Positioning Accuracy is listed as 0.05mm and Repositioning Accuracy as 0.03mm. The table uses two labels, and the specification below preserves both. Describe the dimensional requirements on your part drawing separately so they can be discussed against the proposed process.
Planning sheet work for VIF3015
VIF3015 belongs to the sheet and fiber laser cutting categories. For an inquiry, bring the material grade, thickness, incoming sheet dimensions and the finished-part drawing. Mark the drawing revision. That gives the conversation an identifiable part rather than just a general request for a sheet cutting machine.
Several parts to compare? Give each drawing its own material and thickness entry. A stock sheet fitting the listed area is one question; the requested features and finished-part requirements are others. Include the quantities and the way the work is grouped, so the quotation discussion can address your actual requirement.
VIF3015 configuration
The head choices listed for VIF3015 are Raytools and WSX. Generator alternatives are Raycus, MAX and IPG, and the control system row names CypCut, Golden Orange and Weihong. Ask for the chosen head, source and controls to be written beside VIF3015 in the proposal. A row of alternatives doesn't mean all are fitted together.
Other listed components include Luoyuan, Fuji and Delta servo motor and driver alternatives, Taiwan Linear Rails, and Japan Shinbo or France Mortori reducers. Keep the component selection and the selected power together when reviewing the quotation. Add the destination and any installation or training questions to your inquiry.
Product questions
How does VIF3015 differ from VIF4015 in cutting area?
VIF3015 lists 3000*1500mm. VIF4015 lists 4000*1500mm. The 1500mm entry is shared, while the other dimension is different.
Does the VIF3015 configuration include every listed brand?
The specification gives alternatives. Confirm which head, generator, controls and drive components belong to your proposed machine.
Can I use 70m/min to calculate finished-part output?
That value is labeled maximum linkage speed. It is not a stated cutting time for your part. Supply the drawing, material and thickness for the application discussion.
Where can I compare the other VIF sizes?
Open the VIF series page, then follow the individual model links. Each model page keeps its cutting area with the corresponding specification.
Related equipment and information
Ready to discuss VIF3015?
Share your material, dimensions and process. Start a conversation about the right configuration.