What is the VIC1325D working area?
The listed area is 1300*2500mm. Compare it with the complete blank and layout, keeping the intended orientation visible.
Laser Cutting Machine
VIC1325D — VIC-D Laser Cutting Machine
VIC1325D is the 1300*2500mm working-area option in the VIC-D CO2 laser cutting family. The series description identifies dual laser cutting heads operating simultaneously, plus a CO2 tube, linear guides, stepper motors and belt drive. Its shared specification table lists laser power from 80-600W and Ruida control with USB.
Connect the proposed worktable choice to the actual production file when requesting a quotation. The support surface, blank outline and arrangement of finished shapes should all refer to the same job. A broad request for a large dual-head machine leaves those practical selection details open, even when the nominal area has been chosen.
Technical specifications
| Specification | VIC1325D |
|---|---|
| Working Area | 1300*2500mm |
| Laser Type | CO2 Laser |
| Working Table | Knife Table or Honeycomb Table |
| Laser Power | 80-600W |
| Power Supply | 220V/50HZ, 110V/60HZ |
| Min Line Width | ≤0.15mm |
| Position Accuracy | 0.01mm |
| Repetition Accuracy | 0.02mm |
| Cutting Speed | 150mm/s |
| Control System | Ruida (USB Interface) |
| Graphic Format Support | PLT, DXF, BMP, JPG, AI, etc |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIC1325D working area and equipment structure
The VIC1325D working area measures 1300mm by 2500mm. VIC1318D lists 1300*1800mm, while VIC1530D lists 1500*3000mm. Use those same-family figures to compare the complete layout. The comparison should show the incoming blank and intended orientation, rather than only the dimensions of an individual part removed from it.
Knife and honeycomb tables are listed as alternatives. The configuration narrative describes aluminum blades for the knife-table version. Specify which arrangement you want assessed with your drawing, including any support concerns that arise from the part shapes. Do not treat the alternative entries as a promise that both tables are supplied together.
Two heads working simultaneously are a stated family feature, but the source provides no numerical spacing range or independent power-control description. Ask how the paths in the submitted file would be handled. The optional red dot pointer assists visible positioning; its inclusion should be agreed separately from the basic layout selection.
Planning work with VIC1325D dual laser heads
The source describes non-metallic cutting and names acrylic, wood, paper and rubber. Give the specific material and thickness for the proposed work, along with the required edge or engraving appearance. These material examples describe scope; they do not establish a tested combination of material, power, speed and support surface for your drawing.
Suppose a layout includes both small shapes and a larger surrounding outline. Provide the complete arrangement and explain which finished pieces matter to the job. Ask for the worktable and two-head setup to be considered together. The separate part drawings are useful, but they do not show every relationship visible in the full layout.
VIC1325D configuration
PLT, DXF, BMP, JPG and AI are included in the listed graphic formats. Submit an identifiable file revision with its scale and units stated, and attach a view showing the intended layout. Ruida and USB identify the published control and interface; they do not replace a discussion of how that particular file will be prepared.
The electrical entries are 220V/50HZ and 110V/60HZ. Specify the available supply and request the appropriate configuration, selected laser power and optional equipment in one schedule. The published 80-600W range does not mean every offered machine has every power selection or that the heads have independent settings.
Position Accuracy of 0.01mm and Repetition Accuracy of 0.02mm are listed separately from Cutting Speed of 150mm/s. State the finished-part requirements and any production target independently of those fields. For a useful enquiry, keep the material, full layout, table selection and drawing revision attached to the same request.
Product questions
Which model has a larger listed rectangle?
VIC1530D lists 1500*3000mm. Check the actual layout and proposed head arrangement before selecting the larger model.
Are both worktable alternatives included?
The source lists knife or honeycomb choices. Have the quotation name the selected table; aluminum blades are described for the knife-table arrangement.
What does the dual-head description establish?
It establishes simultaneous operation. It does not quantify head spacing, independent power or the output achievable from a particular production file.
What makes a worktable enquiry specific?
Send the complete layout, individual part outlines, material, thickness and required result. Identify the support arrangement you want considered and the current file revision.
Related equipment and information
Ready to discuss VIC1325D?
Share your material, dimensions and process. Start a conversation about the right configuration.