What changes between VIB4015 and VIB4020?
Their published areas are 4000*1500mm and 4000*2000mm respectively. The 4000mm entry remains the same; the other area dimension changes.
Sheet Laser Cutting Machine
VIB4020 — VIB Laser Cutting Machine
VIB4020 specifications identify a 4000*2000mm cutting area within the VIB fiber laser cutting series. Compared with the VIB4015, this model keeps the 4000mm entry and changes the other area dimension from 1500mm to 2000mm. Its published power range is 1500-20000W, with maximum acceleration listed at 1.3G.
Width is therefore a useful starting point for this model's purchasing discussion. Supply both stock dimensions, rather than describing a sheet only by its longer side. Keep the finished-part drawing alongside that information so the area selection and the requested component can be discussed on the same basis.
Technical specifications
| Specification | VIB4020 |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIB4020 cutting area and model comparisons
The VIB4020 cutting area differs in both dimensions from the 3000*1500mm VIB3015. It also differs from the 6000*2500mm VIB6025. A buyer comparing these alternatives can list the current stock format and any other required formats beside each model, leaving the final application and configuration review as a separate step.
VIB4020 lists 300mm Z axis travel. Its Positioning Accuracy entry is 0.05mm, and Repositioning Accuracy is 0.03mm. These rows describe different specification fields; they do not state that every feature on a particular finished part will meet the same figure.
Maximum acceleration is 1.3G for VIB4020, matching the listed value for VIB4015, VIB6015 and VIB6025. VIB3015 lists 1.4G. Retain the correct model names beside those numbers, and ask about your actual drawing if cycle time is part of the equipment decision.
Specifying work for a VIB4020 fiber laser cutting machine
A VIB4020 fiber laser cutting machine inquiry is easier to review when the drawings show the part orientation and the dimensions that matter to the buyer. Provide the original drawing file or an identifiable revision, together with the material grade, thickness and incoming sheet format. Avoid making a size decision from a photograph alone.
If the work includes several sheet formats, separate them in the inquiry. Record the required parts and order quantities for each format so a less frequent job is not mistaken for the main workload. This is a way to present requirements, not a claim about the machine's output for a particular material.
Explain any comparison with VIB3015 directly. For example, identify the larger stock dimension that prompted you to investigate VIB4020. If the reason is a future drawing rather than current work, label it accordingly and ask for the proposal to distinguish the confirmed requirement from the item still under discussion.
VIB4020 configuration and component selection
The VIB4020 configuration offers listed head alternatives from Raytools, WSX, BOCI and Osprey. Raycus, MAX and IPG appear as generator options, while the control row names CypCut and Weihong. A proposed configuration should state the selected power, generator, head and controls as a definite combination.
Fuji, Delta and Yaskawa are the servo motor and driver alternatives in the VIB table. The rail entry is Taiwan Linear Rails; reducers are listed as Japan Shinbo and France Mortori. Record the proposed selection in the same document as the model and power so the purchasing team can compare revisions accurately.
Use the series page when the comparison needs another VIB area, and the contact page when it needs a configuration response. Include any installation questions in that request. Cutting area is not an overall machine footprint, so it should not be the only figure used to plan the equipment location.
Product questions
How does VIB4020 differ in area from VIB3015?
VIB4020 lists 4000*2000mm, compared with 3000*1500mm for VIB3015. Both published area dimensions are different.
Is the VIB4020 power fixed at 20000W?
No fixed rating is stated by the range alone. The specification lists 1500-20000W; confirm the selected power for the proposed machine.
Does the cutting area describe the machine footprint?
The source labels it Cutting Area. Ask separately for the overall dimensions and installation information needed for your location.
What details help compare VIB4020 proposals?
Keep the model, selected power, named components, stock format and drawing revision together. Add the material, thickness, quantities and outstanding application questions.
Related equipment and information
Compare VIB Laser Cutting Machine models
Ready to discuss VIB4020?
Share your material, dimensions and process. Start a conversation about the right configuration.