What cutting area is listed for VIB3015?
The published VIB3015 area is 3000*1500mm. Compare both dimensions with your intended stock and discuss the part requirements separately.
Sheet Laser Cutting Machine
VIB3015 — VIB Laser Cutting Machine
VIB3015 specifications begin with a 3000*1500mm cutting area and a listed laser power range of 1500-20000W. This is the first size in Victory Industry's five-model VIB sheet laser cutting series. Its maximum acceleration entry is 1.4G, while the other four VIB models list 1.3G.
Use this model as the starting point when your purchasing question is how much cutting area your sheet work requires. Bring the dimensions of the stock you actually receive, alongside the finished-part drawings. A nominal sheet size alone leaves the part requirements and proposed equipment configuration undecided.
Technical specifications
| Specification | VIB3015 |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.4G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIB3015 cutting area and acceleration
The VIB3015 cutting area is 3000*1500mm. VIB4015 changes the first dimension to 4000mm and keeps the 1500mm dimension. That comparison is useful if your shortlist concerns additional length without a change to the other listed dimension. For a different width, VIB4020 lists 4000*2000mm.
The 1.4G maximum acceleration belongs specifically to VIB3015. It does not establish a cutting time for a drawing or a finished-parts target. If production time matters to the purchase, give the supplier the material, thickness, drawing and quantity rather than calculating output from the acceleration figure.
The published Z axis travel is 300mm. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Keep these labels separate when comparing proposals. A drawing tolerance is a requirement for your component, so identify its location on the drawing instead of treating a machine specification as a finished-part guarantee.
Preparing work for a VIB3015 fiber laser cutting machine
A VIB3015 fiber laser cutting machine inquiry can start with a small set of representative sheet parts. Choose drawings that explain what you need: an ordinary repeat part, a larger outline and any detail whose dimensions deserve attention. Identify the material grade and thickness for each one.
State whether the quotation is for one recurring job or a changing mix. For recurring work, include the drawing revision and expected order quantities. For a mix, separate the requirements into a short parts list. These are practical ways to describe the purchase; the specification does not provide a tested result for those jobs.
VIB3015 configuration choices
The VIB3015 configuration lists Raytools, WSX, BOCI and Osprey laser heads, with Raycus, MAX and IPG generator alternatives. CypCut and Weihong are the named control systems. Ask the proposal to identify one selected combination and power rating, so you can compare complete offers rather than a list of possible components.
Fuji, Delta and Yaskawa appear in the servo motor and driver row. The guide rails are listed as Taiwan Linear Rails; the reducer alternatives are Japan Shinbo and France Mortori. Keep the selected components with the model name in your purchasing record, including any requested changes from the quoted configuration.
Before requesting a revision, mark which requirement changed: sheet dimensions, part drawing, material, power selection or a component preference. That gives the next quotation a clear basis. Use the VIB series page to review the other model areas, or send the current drawing and configuration questions through the contact page.
Product questions
What is the main area difference between VIB3015 and VIB4015?
VIB3015 lists 3000*1500mm and VIB4015 lists 4000*1500mm. Their 1500mm dimension is shared; the other listed dimension changes.
Is every VIB model listed at 1.4G?
No. VIB3015 lists maximum acceleration of 1.4G. VIB4015, VIB4020, VIB6015 and VIB6025 list 1.3G.
Does 1500-20000W identify the power of a quoted machine?
It is the published range. Your quotation should name the chosen power rating and generator for the proposed VIB3015.
What should accompany a VIB3015 inquiry?
Send the drawing revision, material grade, thickness, stock dimensions and quantity. Add your preferred configuration and any dimensions that require particular attention.
Related equipment and information
Compare VIB Laser Cutting Machine models
Ready to discuss VIB3015?
Share your material, dimensions and process. Start a conversation about the right configuration.