What is the V100 tube processing range?
The table lists round tubes at dia. 150-1000 mm, square tubes at 150 x 150-850 x 850 mm, and I-beams and H-beams channel steel at 10#-85#. Use the actual section drawing for clarification.
Tube Laser Cutting Machine
V100 Structural Steel Profile Laser Cutting Machine
V100 is a structural steel profile laser cutting machine listed in the tube and fiber laser cutting categories. Its Item and Parameter table describes a single product identity, with no submodel columns. Read the processing range alongside the clamping, workpiece load and loading fields to retain the full set of stated conditions.
The Tube Processing Range entry reads: Round tubes: dia. 150-1000 mm; Square tubes: 150 x 150-850 x 850 mm; I-beams and H-beams channel steel: 10#-85#. That last expression is retained as published. A different section designation should not be substituted without clarification of the actual profile dimensions.
Technical specifications
| Specification | Configuration |
|---|---|
| Item | Parameter |
| Tube Processing Range | Round tubes: dia. 150-1000 mm; Square tubes: 150 x 150-850 x 850 mm; I-beams and H-beams channel steel: 10#-85# |
| X/Y-Axis Positioning Accuracy | ±0.05 mm/1000 mm |
| X/Y-Axis Repeat Positioning Accuracy | +/-0.05 mm |
| Maximum X-Axis Travel | 1050 mm |
| Maximum Y-Axis Travel | 13920 mm |
| Maximum Z-Axis Travel | 700 mm |
| Maximum B-Axis Travel | +/-360 deg |
| Maximum A-Axis Travel | +/-45 deg |
| Maximum Acceleration | 0.2G |
| Minimum Clamping Wall Thickness | ≥5.0 mm |
| Maximum Single-Workpiece Load Capacity | ≤5T |
| Loading Method | Manual loading |
| Loading Length | 12000 mm |
| Host Size (L x W x H) | approx. 23195 x 4135 x 4000 mm |
| Weight | approx. 13.5T |
| Power Supply/Voltage Frequency | 3 / 380V (+/-10%) / 50Hz |
| Main Power Protection Level | IP54 |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
V100 tube processing range and handling specifications
Minimum Clamping Wall Thickness is ≥5.0 mm. Maximum Single-Workpiece Load Capacity is ≤5T. Place both entries beside the intended stock description, including its drawing, length and weight. A profile range alone would leave these two explicit conditions out of the comparison.
The table separates linear and angular travel by axis. Maximum X-Axis Travel is 1050 mm, Y-Axis Travel is 13920 mm and Z-Axis Travel is 700 mm. Maximum B-Axis Travel is +/-360 deg; Maximum A-Axis Travel is +/-45 deg. They should remain individual fields instead of becoming an unnamed overall working range.
X/Y-Axis Positioning Accuracy is ±0.05 mm/1000 mm, including the per-1000mm expression. The repeat field is different: X/Y-Axis Repeat Positioning Accuracy is +/-0.05 mm. Maximum Acceleration is 0.2G. These are published machine parameters, not a record of the results achieved on a particular finished profile.
V100 structural steel profile laser cutting machine planning
Begin a V100 discussion with the section drawing. Identify the material, incoming length, wall thickness and workpiece weight, then add the finished features to be reviewed. Show which face carries each hole, opening or end detail. Keep the drawing revision visible so the conversation concerns one defined version of the part.
For a mix of profiles, give each section its own record and quantities. Actual dimensions are useful even when the stock has a familiar local name, especially alongside the original 10#-85# entry. This is a way to describe the proposed work for review; it does not claim a tested application or reinterpret the source as a different section standard.
V100 Structural Steel Profile configuration and quotation details
V100 lists Manual loading as Loading Method and 12000 mm as Loading Length. The latter is separate from the 13920 mm Maximum Y-Axis Travel entry. Keep both labels. If the request calls for a different loading arrangement, identify it as a requirement to discuss rather than an included feature inferred from the product name.
Host Size (L x W x H) is approx. 23195 x 4135 x 4000 mm and Weight is approx. 13.5T. Preserve the approximate qualifier on each. On a site layout, show the profile approach and finished-piece removal as well as the machine position. Existing handling equipment and requested new supply should be distinguishable.
The electrical-related entries are Power Supply/Voltage Frequency at 3 / 380V (+/-10%) / 50Hz and Main Power Protection Level at IP54. They belong in the installation discussion under those names. There is no Laser Power row in the V100 table. A quotation needs to identify the proposed configuration without borrowing a laser power or submodel from another series.
Product questions
What does V100 manual loading refer to?
Manual loading is the stated Loading Method. It does not specify that a separate automatic loading package is included. Any different requested arrangement needs an explicit scope in the proposal.
What is the V100 clamping wall thickness entry?
Minimum Clamping Wall Thickness is ≥5.0 mm. Keep it with the workpiece description and the separate Maximum Single-Workpiece Load Capacity entry of ≤5T.
Is Loading Length the same as Y-Axis Travel?
No. Loading Length is 12000 mm, while Maximum Y-Axis Travel is 13920 mm. They are separate fields and should retain their original names.
Does the table specify V100 laser power or submodels?
No. It uses Item and Parameter columns and has no Laser Power row. A proposal should identify the actual equipment configuration without importing a power or model from a different series.
Related equipment and information
Ready to discuss V100 Structural Steel Profile Laser Cutting Machine?
Share your material, dimensions and process. Start a conversation about the right configuration.