Does VIP6015T state a 6000mm tube loading length?
The table's 6000*1500mm value is Cutting Area. Do not convert it into a tube-length claim; provide the intended stock and ask for confirmation.
Tube And Sheet Laser Cutting Machine
VIP6015T — VIP-T Laser Cutting Machine
VIP6015T specifications list a 6000*1500mm cutting area and a 1500-20000W power range in the VIP-T tube and sheet series. It shares a 1500mm second area dimension with VIP3015T and VIP4015T. The table also gives a 140m/min maximum linkage-speed entry, distinct from application cutting speed.
The two length questions in a combined project should not be mixed together. The 6000mm value belongs to the sheet Cutting Area entry; the intended tube stock length belongs in your application brief. Provide both descriptions before discussing the selected power and equipment components.
Technical specifications
| Specification | VIP6015T |
|---|---|
| Cutting Area | 6000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP6015T cutting area and separate length questions
The VIP6015T cutting area compares with VIP3015T at 3000*1500mm when the sheet requirement keeps the same second dimension. VIP6025T lists 6000*2500mm if the width entry is the deciding question. Keep the actual stock formats beside the comparison rather than inferring a tube limit from either model.
Maximum acceleration is 1.3G and Z axis travel is 300mm. The separate maximum linkage speed is 140m/min. These fields do not give a cutting cycle for a long sheet component or a rate of completed tube parts; those questions need the actual workpiece information.
The accuracy rows list 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. Identify the required dimensions on each drawing, particularly where a long part has several critical features. Keep the component requirement separate from the machine labels instead of using them as an automatic parts guarantee.
Long-stock information for a VIP6015T fiber laser cutting machine
For a VIP6015T fiber laser cutting machine inquiry, start the sheet list with the jobs that require the long stock format. Include material grade, thickness, stock dimensions, drawing revisions and quantities. Show regular smaller work too if it forms part of the intended workload.
The tube list should describe section shape, outside dimensions, wall thickness, material, incoming length and finished features. Ask for a specific response to the proposed arrangement. The 6000*1500mm sheet-area entry does not supply a tube diameter or loading-length specification.
If one workpiece group changes during the discussion, revise that part of the brief explicitly. A different tube section should not erase the confirmed sheet requirement. Likewise, a changed sheet format does not settle the tube questions. This keeps a combined proposal aligned with the actual revision.
VIP6015T configuration for the current revision
The VIP6015T configuration lists Raytools, WSX, BOCI and Osprey head alternatives and Raycus, MAX and IPG generators. Confirm the selected power rating, head and source in the offer. The published range and brand list should be resolved into a particular equipment combination.
CypCut and Weihong are the named controls. Fuji, Delta and Yaskawa appear as servo motor and driver alternatives. Keep the selected components with the model and both workpiece references so an equipment change remains distinguishable from an application change.
The source also lists Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Request the overall dimensions and installation information needed for the destination through the contact page. The series page provides other sheet areas, while the Cutting Area value is not an overall footprint or a tube-loading description.
Product questions
What changes from VIP3015T in the area table?
VIP3015T lists 3000*1500mm. VIP6015T retains the 1500mm second dimension and changes the other entry to 6000mm.
How does VIP6025T compare?
VIP6025T lists 6000*2500mm. It shares the 6000mm entry and changes the second area dimension.
Can maximum linkage speed predict either sheet or tube output?
The 140m/min entry does not provide an application cycle or finished-part output. Supply the actual drawings, materials and quantities for those questions.
What needs to remain clear in a combined quotation?
Keep separate sheet and tube requirements, the current drawing revisions and a definite selection of power and components. List any unanswered tube or installation questions explicitly.
Related equipment and information
Compare VIP-T Laser Cutting Machine models
Ready to discuss VIP6015T?
Share your material, dimensions and process. Start a conversation about the right configuration.