What area is published for VIP4020T?
The source lists 4000*2000mm. It is the sheet-area reference and does not establish tube processing limits.
Tube And Sheet Laser Cutting Machine
VIP4020T — VIP-T Laser Cutting Machine
VIP4020T specifications list a 4000*2000mm cutting area for this model in the VIP-T tube and sheet cutting range. Its published laser power range is 1500-20000W. The area retains VIP4015T's 4000mm entry and changes the second dimension from 1500mm to 2000mm.
Use that comparison to explain the wider sheet requirement, and describe the tube work separately. The model table also lists 140m/min maximum linkage speed, but that motion label is not a cutting-speed claim. A configuration discussion needs the actual workpiece information for both parts of the project.
Technical specifications
| Specification | VIP4020T |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP4020T cutting area and the motion specification
The VIP4020T cutting area differs in both dimensions from VIP3015T at 3000*1500mm. VIP6025T lists 6000*2500mm when another change to both area entries is under consideration. State which stock formats motivated the shortlist instead of treating a larger area as a complete answer to the application.
Maximum acceleration is 1.3G and Z axis travel is 300mm for VIP4020T. The 140m/min maximum linkage-speed field remains separate. Do not combine these into a cycle-time assumption or use them as a finished-parts-per-hour figure for a sheet or tube drawing.
The table lists Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm. Identify the dimensional requirements for the intended components on their drawings. This distinguishes the required finished-part result from the general machine values, without suggesting that a particular application has already been tested.
An assembly brief for a VIP4020T fiber laser cutting machine
For a VIP4020T fiber laser cutting machine inquiry, associate each sheet format with a material grade, thickness, drawing revision and quantity. If the 2000mm second area dimension is needed by only one job, identify that job alongside the regular sheet workload.
Tube records need section shape, outside dimensions, wall thickness, material, incoming length and finished features. Ask the supplier to respond to those requirements explicitly. The 4000*2000mm sheet-area entry does not define a tube section-size limit or loading length, and another family table should not fill those gaps.
If sheet and tube parts belong to one assembly, retain the individual drawing references and requirements. An assembly name alone may not describe either stock format. Use the same job information when comparing possible configurations so an equipment difference is not confused with an application revision.
VIP4020T configuration for two workpiece types
The VIP4020T configuration lists Raytools, WSX, BOCI and Osprey head alternatives. Raycus, MAX and IPG appear as generators, with CypCut and Weihong controls. Confirm a selected power and a definite component combination in the proposed offer instead of leaving every item as an option list.
The servo motor and driver alternatives are Fuji, Delta and Yaskawa. Taiwan Linear Rails is the rail entry, while reducers are listed as Japan Shinbo or France Mortori. Keep the proposed selections in separate fields so later changes remain visible to the purchasing and technical teams.
Send the combined workpiece brief through the contact page, including the installation information needed for the destination. The series page gives other sheet-area entries if the requirement changes. Overall equipment dimensions and tube arrangements need their own response, separate from the Cutting Area field.
Product questions
How does VIP4020T differ from VIP3015T?
VIP3015T lists 3000*1500mm, so both sheet-area dimensions change in the VIP4020T entry.
What changes from VIP4015T?
Both list 4000mm as the first area dimension. Their second entries are 1500mm and 2000mm respectively.
What does 140m/min mean in this specification?
It is maximum linkage speed, not material cutting speed or a promised output for the proposed sheet and tube jobs.
What needs confirming before comparing offers?
Keep the same drawing and stock requirements, obtain a response to the tube section and loading questions, and identify the selected power and components in each offer.
Related equipment and information
Compare VIP-T Laser Cutting Machine models
Ready to discuss VIP4020T?
Share your material, dimensions and process. Start a conversation about the right configuration.