What is the VIF6020T cutting area?
The published entry is 6000*2000mm. Both dimensions belong to the sheet-area comparison, without defining tube processing limits.
Tube And Sheet Laser Cutting Machine
VIF6020T — VIF-T Laser Cutting Machine
VIF6020T specifications show a 6000*2000mm cutting area and a 1500-3000W laser power range. In the VIF-T combined tube and sheet series, it shares the 6000mm area entry with VIF6015T and VIF6025T, and the 2000mm entry with VIF4020T.
This gives two useful directions for the sheet-size comparison: retain the length entry and compare widths, or retain the second dimension and compare 4000mm with 6000mm. State which requirement matters to your project. Describe tube work separately, since those area dimensions do not define tube capacity.
Technical specifications
| Specification | VIF6020T |
|---|---|
| Cutting Area | 6000*2000mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF6020T cutting area in two comparison directions
The VIF6020T cutting area changes both dimensions of VIF3015T at 3000*1500mm. Within the 6000mm group, VIF6015T lists 6000*1500mm and VIF6025T lists 6000*2500mm. Keep the intended sheet stock sizes beside these model names so the shortlist follows the actual requirement.
Maximum acceleration is 0.8G and maximum linkage speed is 70m/min. The table also lists 100mm Z axis travel. A linkage-speed entry is not a cutting-speed specification for a material, so it cannot provide an output estimate for the drawing being discussed.
The separate Positioning Accuracy and Repositioning Accuracy values are 0.05mm and 0.03mm. If your part has critical dimensions, identify them on the drawing and state the required limits. This keeps the application question specific without converting a general machine field into a finished-part guarantee.
A size brief for a VIF6020T fiber laser cutting machine
For a VIF6020T fiber laser cutting machine inquiry, include the sheet formats that explain the choice of both area dimensions. Give each format its material grade, thickness, drawing references and quantities. If only one job needs the longer dimension, distinguish it from the more regular workload.
The tube inquiry needs section shape, outside dimensions, wall thickness, material, incoming length and finished features. Ask for the proposed arrangement to be confirmed against these particulars. The 6000*2000mm area should not be used as either a tube diameter or loading-length specification.
A comparison with VIF4020T can keep the same sheet width while considering a different length entry. A comparison with VIF6025T asks a different size question. Retain the same tube brief during either comparison unless the tube job itself changes, and flag any revised drawings.
VIF6020T configuration as a definite selection
The VIF6020T configuration offers listed head alternatives from Raytools and WSX, with Raycus, MAX and IPG generators. Ask for the proposed head, generator and selected power rating to be identified together. The entire published range does not describe one particular configured machine.
CypCut, Golden Orange and Weihong appear in the control row. Luoyuan, Fuji and Delta are the listed servo motor and driver alternatives. A component preference should be stated as a requirement or question in the inquiry and then resolved into the actual proposed selection.
The guide rails are listed as Taiwan Linear Rails, and reducer alternatives are Japan Shinbo and France Mortori. Include installation questions for the destination when contacting the supplier. The series page provides other sheet-area entries, while the specific sheet and tube drawings provide the basis for a configuration discussion.
Product questions
Which model shares its 2000mm area dimension?
VIF4020T lists 4000*2000mm. The other area entry changes from 4000mm to 6000mm for VIF6020T.
How does VIF6020T compare with VIF3015T?
VIF3015T lists 3000*1500mm, so both area dimensions differ from the 6000*2000mm VIF6020T entry.
Which controls can be discussed for the configuration?
The table lists CypCut, Golden Orange and Weihong. Confirm the control selected for the proposal together with the power and other components.
Does the area table answer tube-length questions?
No. Describe the incoming tube length, section and drawing, then request confirmation for the proposed arrangement. Keep that response separate from the sheet-area selection.
Related equipment and information
Compare VIF-T Laser Cutting Machine models
Ready to discuss VIF6020T?
Share your material, dimensions and process. Start a conversation about the right configuration.