What cutting area is published for VIF3015T?
The table gives 3000*1500mm. It is the sheet-area reference, not a tube diameter or loading-length limit.
Tube And Sheet Laser Cutting Machine
VIF3015T — VIF-T Laser Cutting Machine
VIF3015T specifications list a 3000*1500mm cutting area and a laser power range of 1500-3000W. It belongs to the VIF-T tube and sheet laser cutting series. The published table also names control alternatives and a 70m/min maximum linkage speed, which should be read under its original motion label.
Begin the inquiry with the sheet format and a separate description of the tube work. The area provides a sheet-size comparison; it does not state a tube diameter or loading-length limit. A clear two-part brief is needed before the selected power and components can be discussed against your requirements.
Technical specifications
| Specification | VIF3015T |
|---|---|
| Cutting Area | 3000*1500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF3015T cutting area and motion fields
The VIF3015T cutting area shares its 1500mm dimension with VIF4015T at 4000*1500mm and VIF6015T at 6000*1500mm. If the second area dimension is the reason for comparing models, VIF4020T lists 4000*2000mm. Keep the actual incoming sheet format attached to the model shortlist.
Maximum acceleration is 0.8G, maximum linkage speed is 70m/min and Z axis travel is 100mm. These are distinct motion fields. The 70m/min entry is not a published cutting speed for your material, and it cannot supply a finished-parts-per-hour figure without an application-specific basis.
Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Show the dimensional requirements for your sheet and tube parts on their drawings. Keeping those requirements separate from the machine labels avoids suggesting that an unspecified finished component has already been tested.
Separate workpiece information for a VIF3015T fiber laser cutting machine
For a VIF3015T fiber laser cutting machine inquiry, prepare one sheet job and one tube job that explain the purchase. Give the sheet dimensions, material grade, thickness, drawing revision and quantity. Describe the tube section, outside dimensions, wall thickness, material, incoming length and finished features in its own entry.
A combined category identifies the product range but does not resolve every tube-processing question. Ask the supplier to confirm the proposed arrangement against your section and drawing. Leave any unanswered section or loading requirement as a question rather than assigning the sheet-area value to it.
If your current workload is mainly sheet parts, say which tube requirements are confirmed and which are still being developed. The same distinction applies when tube work is the priority. This helps the proposal address the actual purchase without presenting a future possibility as an established production job.
VIF3015T configuration and control choices
The VIF3015T configuration lists Raytools and WSX heads, with Raycus, MAX and IPG generators. Ask the offer to identify the selected head, generator and power rating within the 1500-3000W range. A list of alternatives is not a statement that every option belongs to one machine.
CypCut, Golden Orange and Weihong are the control alternatives. Luoyuan, Fuji and Delta are listed for the servo motor and driver. Name the proposed selections in the quotation so your team can compare configurations without borrowing component assumptions from another cutting series.
The guide rail entry is Taiwan Linear Rails, and the reducer alternatives are Japan Shinbo and France Mortori. Keep the equipment selections with the two workpiece briefs when contacting the supplier. Request overall equipment and installation information separately from the published cutting area.
Product questions
How does VIF4015T differ in area?
VIF4015T lists 4000*1500mm. It retains the 1500mm dimension and changes the other entry from 3000mm to 4000mm.
Does 70m/min describe material cutting speed?
The source calls it maximum linkage speed. It should not be quoted as a cutting speed or finished-part output for a particular job.
Which control options appear for VIF3015T?
CypCut, Golden Orange and Weihong are listed. Confirm one proposed selection and keep it with the chosen power and components.
What needs separate confirmation for tubes?
Supply the section, dimensions, wall thickness, material, incoming length and drawing. Ask for the proposed arrangement to be confirmed against those details.
Related equipment and information
Compare VIF-T Laser Cutting Machine models
Ready to discuss VIF3015T?
Share your material, dimensions and process. Start a conversation about the right configuration.