VIC1390A — VIC-A Laser Cutting Machine

The VIC1390A working area has two dimensions to check, 1300mm and 900mm. If the layout changes between drawing revisions, attach the current arrangement and identify what changed. A previous size discussion may have been based on a different blank or part orientation. Keep that distinction visible when asking whether to retain this model on the shortlist.

The VIC-A configuration names a CO2 cutting head, CO2 laser tube, linear guides, stepper motors and belt drive. The automatic feeding function is described separately as loading material into the cutting area. Ask the quotation to identify both the cutting configuration and the proposed feeding arrangement for your work.

The table gives 150mm/s for Cutting Speed, 0.01mm for Position Accuracy and 0.02mm for Repetition Accuracy. Min Line Width is ≤0.15mm. These are distinct machine fields. Keep a required finished tolerance or production cycle in the application brief rather than derive it from one catalog value.

VIC-A is positioned for non-metallic materials, with acrylic, wood, leather and plastic named as examples. The description also mentions signage, packaging and textiles. For a relevant inquiry, specify the actual material and thickness instead of relying on the industry name; the general positioning does not give a tested thickness or finish for each material.

Imagine an artwork revision that adds another outline to a repeated layout. Send the revised layout and explain whether the incoming blank also changes. Identify the quantity and the intended sequence for material presentation, feeding and removal. Ask what the proposed feeding equipment covers, without assuming that the device description defines every step of the workflow.

The Ruida USB control entry is accompanied by PLT, DXF, BMP, JPG and AI among the named graphic formats. Provide a representative file and state its units and revision. Keep the file and visible drawing consistent so that a discussion of the automatic feeding arrangement uses the same geometry as the cutting request.

Choose the working surface explicitly. Knife and honeycomb are the published alternatives; aluminum blades are described for the knife option. Ask the offer to name the selected table and laser power. If an alternative surface is being considered, keep it on a separate line rather than assume that both are included.

State the electrical supply at the destination. The catalog lists 220V/50HZ and 110V/60HZ, so the proposed machine version needs confirmation. Request the installation information and handling details relevant to your layout with the equipment proposal. Working-area dimensions and an automatic feeding description do not provide overall machine dimensions or a complete installation plan.