What is the VIT-F52 Working Area entry?
The published value is 12000*520mm. It remains a Working Area field rather than an independently confirmed tube-diameter or loading limit.
Tube Laser Cutting Machine
VIT-F52 — VIT-F Laser Cutting Machine
VIT-F52 specifications show a 12000*520mm Working Area entry between VIT-F35 and VIT-F85 in the VIT-F table. The laser power range is 12-20kW, with Max/IPG source alternatives and FSCUT controls. The model is listed as tube and fiber laser cutting equipment.
The 520mm number needs its original field label in the purchasing record. Working Area is not automatically a maximum tube diameter or a complete loading specification. Provide the actual section dimensions, stock description and drawing before treating the model comparison as a response to the intended application.
Technical specifications
| Specification | VIT-F52 |
|---|---|
| Working Area | 12000*520mm |
| Positioning Accuracy | ±0.05 mm |
| Repositioning Accuracy | ±0.02 mm |
| Max Moving Speed | 100 m/min |
| Laser Source | Max/IPG |
| Laser Power | 12-20kw |
| Control System | FSCUT |
| Machine Size | 11800*2280*2600mm |
| Product Weight | 5000-20000kg |
| Max Acceleration | 0.6-1.2G |
| Voltage | 220V 1P 50HZ /380V 3P 50HZ |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-F52 working area and interpretation of shared fields
The VIT-F52 working area is listed as 12000*520mm, compared with 12000*850mm for VIT-F85 and 12000*350mm for VIT-F35. These entries share their first number. They do not, by themselves, define every permitted section geometry or establish a particular stock-handling arrangement.
The accuracy rows give ±0.05 mm Positioning Accuracy and ±0.02 mm Repositioning Accuracy. Maximum moving speed is 100 m/min and maximum acceleration is 0.6-1.2G. Keep the field names and signs intact instead of using the figures as a finished-part guarantee or material cutting-speed statement.
Machine Size is listed as 11800*2280*2600mm and Product Weight as 5000-20000kg. These are shared table entries, and the proposed equipment needs its own confirmed installation details. Product Weight should not be treated as a tube-load rating or a promise about the stock the machine can carry.
A section comparison for a VIT-F52 fiber laser cutting machine
For a VIT-F52 fiber laser cutting machine inquiry, organise the job by tube section. Give the section shape, outside dimensions, wall thickness, material grade and incoming length, with the drawing revision and quantity. Identify the features required on the finished part rather than providing only a stock-size description.
A comparison with VIT-F85 should state what workpiece requirement prompted the larger second Working Area entry. If the future section or drawing is still provisional, mark it accordingly. The table's model choices should not turn an unfinished application description into an assumed capability.
Include stock-handling and loading questions with the actual stock description. Ask for a specific response, preserving the distinction between Product Weight and the workpiece. Any production-output question also needs the drawing and material details; maximum moving speed is not the answer to that question.
VIT-F52 configuration and installation details
The VIT-F52 configuration names Max/IPG sources and FSCUT controls. Ask the proposal to identify the chosen source and actual power rating within the published 12-20kW range. A range and an alternative source list should resolve into a definite equipment description.
The table's voltage entry gives 220V 1P 50HZ and 380V 3P 50HZ. Confirm the arrangement applicable to the offered configuration and request its installation requirements. Do not assume that listing two alternatives proves automatic compatibility with both supplies on one machine.
Use the series page for the three Working Area entries and the contact page for the complete section and configuration brief. Keep the exact dimensions, equipment weight and stock-handling information among the items to confirm for the destination, rather than treating the shared table as a finished layout.
Product questions
How does VIT-F52 compare with VIT-F85?
VIT-F85 lists 12000*850mm, changing the second entry from 520mm to 850mm while retaining 12000mm.
What does the Product Weight range refer to?
It is the equipment field labeled Product Weight, listed as 5000-20000kg. It is not a stated allowable tube load.
Does 100 m/min describe cutting speed?
The source labels it maximum moving speed. Cutting or output questions need a response for the actual material and drawing.
What should a defined VIT-F52 proposal identify?
Confirm the selected source, power and applicable voltage arrangement, with the equipment dimensions and installation details needed for the actual stock and destination.
Related equipment and information
Compare VIT-F Laser Cutting Machine models
Ready to discuss VIT-F52?
Share your material, dimensions and process. Start a conversation about the right configuration.