What identifies VIM50FP?
It is the 50W portable FP entry with a listed wavelength of 1080nm. Its optical field and generator remain choices to identify in the actual configuration, rather than assumptions derived from the model name.
Laser Marking Machine
VIM50FP — VIM-FP Laser Marking Machine
VIM50FP is the 50W, 1080nm portable fiber laser marking model in the FP range. Its two listed marking-field choices make the graphic boundary an important part of selection. Give the full width and height of the intended mark before discussing which optical arrangement belongs in the offer.
Separate the graphic boundary from the overall dimensions of the component. A published field is not a maximum workpiece size, and the portable description does not establish how every part will be supported. A drawing should show both the mark and the way the component occupies the proposed workstation.
Technical specifications
| Specification | VIM50FP |
|---|---|
| Laser Power | 50W |
| Laser Wavelength | 1080nm |
| Making Range | 110*110mm, 200*200mm |
| Laser Generator | Raycus, IPG |
| Minimum Line Width | 10 Microns |
| Minimum Characters | 0.15mm |
| Usage Environment | Clean and Dust-Free or Dust-Less |
| Graphic Format Supported | bmp, jpg, gif, png, tif, ai, dxf, dst, plt, etc |
| Laser Module Life | >100000 Hours |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIM50FP fiber laser marking machine structure
The source names a fiber laser generator, air cooling device, galvo scanner and field lens. Marking ranges are listed as 110*110mm and 200*200mm. Ask which lens produces the offered field and whether alternative optics are included, rather than treating both dimensions as an automatic switching function.
The red dot pointer provides a visible reference for positioning. Settings can be adjusted and configured through the control system, with monitoring. Those features do not establish automatic focusing, workpiece recognition or a process that chooses the optical field from the artwork without operator involvement.
Minimum Line Width is 10 Microns and Minimum Characters is 0.15mm in the table. Keep these values distinct from the selected range. The source does not demonstrate identical results for every combination of field, graphic and substrate or guarantee the readability of any submitted font.
VIM50FP work preparation
Supply the substrate and surface condition with the artwork. This page does not present a specific material-compatibility list or a tested application result. If the requested mark occupies only part of a larger face, show the surrounding geometry and identify the edge used as the placement reference.
Where the component needs a support or fixture, include its proposed position in the layout. List changes in graphic size between jobs. These are requirements for the configuration discussion, not evidence that a fixture, automatic field change or universal component-handling arrangement is included with VIM50FP.
VIM50FP 50W laser marker configuration
Raycus and IPG are the generator options named in the table. Record the selected source, field lens and marking range alongside the 50W model in the quotation. A complete option list should distinguish equipment supplied with the machine from alternatives requested for a different planned job.
Supported graphic formats include bmp, jpg, gif, png, tif, ai, dxf, dst and plt. Provide the original file and a dimensioned reference view. The same extension can contain different artwork layouts, so keep scale, orientation and the intended placement visible in the job information.
The source specifies a clean, dust-free or low-dust environment and a door or panel opening that triggers the interlock stop. Confirm the actual station protection and connection requirements before relocation. The Laser Module Life entry is >100000 Hours; warranty, maintenance and delivery commitments require their own documented terms.
Product questions
How should the marking range be selected?
Submit the complete graphic dimensions and ask for the proposed lens and field. The source lists 110*110mm and 200*200mm but does not state that both optical arrangements are included as standard.
Does the red dot pointer provide autofocus?
The supported description is visible positioning assistance. Automatic focus adjustment or automatic correction of a changing surface is not established by the red dot feature.
What details matter when moving the equipment?
Request its actual dimensions, weight, connections and support requirements. The portable structure does not establish battery operation, cable reach or suitability for every intended location without reviewing those details.
What should accompany fine artwork?
Include finished dimensions, the smallest detail that matters and the desired mark location. State the substrate and surface finish so the fine-detail fields are considered alongside the actual proposed job.
Related equipment and information
Compare the VIM-FP Laser Marking Machine series
Ready to discuss VIM50FP?
Share your material, dimensions and process. Start a conversation about the right configuration.